无码日本精品蜜桃_九一精品无码一区_亚瑟中文字幕欧美_AV丝袜一区二区_AV丝袜一区二区_中文无码有码88_手机在线播放av_青青日中文字幕

JHY10L/R

產品材質：304不銹鋼
表面處理：本色
最大承重：120Kg/對，安全系數n=1.5 適用范圍：歐標20槽外平開窗，分左右
Material: Stainless steel 304
Surface treatment: Natural
Maximumloadbearing:120Kg/pair,safety factor n=1.5
Scope of application: European standard 20- slot outswing
Casement windows, divided into leftward and rightward ones

JHY41A-L/R

產品材質：304不銹鋼
表面處理：本色
最大承重：80Kg/對，安全系數n=1.5 適用范圍：歐標20槽外平開窗，分左右
Material:Stainlessteel304
Surface treatment:Natural
Maximumloadbearing80kg/pair,safetyfactorn=1.5
Scope ofapplication:Europeanstandard20-slot outswing
Casement windows, divided into leftwerd and rightward ones 產品材質：304不銹鋼
表面處理：本色
最大承重：80Kg/對，安全系數n=1.5 適用范圍：歐標20槽外平開窗，分左右
Material: Stainless steel 304
Surface treatment: Natural
Maximumloadbearing80Kg/pair，safetyfactorn=1.5
Scope of application: European standard 20-slot outswing
Casement windows, divided into lefbward and rightward ones

JHY41C-L/R

JHY47L/R

產品材質：304不銹鋼
表面處理：本色
最大承重：120Kg/對，安全系數n=1.5 適用范圍：歐標20槽外平開窗，分左右
Material: Stainless steel304
Surface treatment:Natural
Maximumload bearing:120kg/pair,safetyfactorn=1.5
Scope ofapplication:European standand 20-slotoutswing
casemen twindows, civiced into leftward and rightwverd ones 產品材質：304不銹鋼
表面處理：本色
最大承重：150Kg/對，安全系數n=1.5 適用范圍：特殊槽口外平開窗，分左右
Material: Stainless steel304
Surface treatment:Natural
Maximumload bearing:15okg/pair,safetyfactorn=1.5
Scope ofapplication: Special slot outsideflat open win
dow, divided into leftward and rightwverd ones

Scopeofapplication:Europeanstandard20-slotoutswing casemen twindows, divided into leftwerd and rightwward ones

JHY51L/R

Stay Series 撐擋

撐擋

JG/T128-2017

定義：限制活動扇開啟角度的裝置，又稱限位器、開啟限位器。

性能指標：

1.鎖定式撐擋的鎖定力不應小于200N；摩擦式撐擋摩擦力不應小于40N。
2.鎖定式撐擋反復啟閉1萬次后，各部件不應損壞，且鎖定力不應小于200N；摩擦式撐擋反復啟閉1.5萬次后，且摩擦力不應小于40N。
3.內平開窗用撐擋在承受350N作用力后，撐擋不應脫落。外開上懸窗用撐擋在開啟方向承受1000N作用力后，在關閉方向承受600N力作用后，且撐擋所有部件不應損壞。

使用范圍：內平開窗、上懸窗。

Stay Series JG/T128-2017

Definition:

Adevice thatlimits the openingangleofamoving fan,also called limiterand opening limiter.

Performanceindex:

1.Thelockingforceofthelockingbraceshouldnotbelessthan2ooN;thfrictionalforceofthefriction-typebraceshouldnotbe lessthan 40N.
2.Afterrepeatedlyopeningandclosingofthelockingbaceforotimesallomponentsshallnotbedamagedandthe lockingforcesallnotsstanNftr15tousandtimesofrepeatedyopeingadloingoftrcio-teth frictionalforceshould notbe lessthan40N.
3.Thebraceusedforinswingingcasementwindowshallnotfalloffafteritisbearingtheforceof35oNAfter10ooNforceis appliedintheopeningdirectionofbraceusedforopeningupperhangingwindowand6oONforceisappliedintheclosing direction,allparts ofthe braceshallnotbe damaged.

撐擋系列STAYSERIES

JD005

JFZ05L/R

JFZ06L/R

Transmission DeviceSeries傳動鎖閉器

傳動鎖閉器 JG/T126-2017

定義：限制門窗扇鎖閉和開啟的桿形、帶鎖點的傳動裝置。

主要性能指標：

1.無鎖舌的齒輪驅動式傳動鎖閉器空載轉動力矩不應大于3N·m；由執手驅動鎖舌的傳動鎖閉器驅動部件操作力矩不應大于3N·m，由鑰匙驅動鎖舌的傳動鎖閉器驅動部件操作力矩不應大于1.2N·m；
2.無鎖舌齒輪驅動式傳動鎖閉器承受25N·m力矩的作用后，各零部件不應斷裂、損壞；有鎖舌齒輪傳動鎖閉器：碰舌驅動部件承受60N·m或25N·m扭矩后，呆舌驅動部件承受30N·m或20N·m扭矩后，傳動鎖閉器應使用功能正常，且操作力仍應滿足規定的要求；
3.反復啟閉20萬次，代號為1；反復啟閉2.5萬次，代號為I；按反復啟閉使用頻率啟閉循環后，各構件應無扭曲、無變形、不影響正常使用
適用范圍：平開門窗、推拉門。

TransmissionDevice JG/T126-2017

Definition:

Arod-shapedtransmissiondevicethatlimitsthelockingandopeningofdoorandwindowfanwithlockpoint.

Performance index:

1.The no-loadrotationaltorquefornobolt gear-driventransmissonlockshouldnotexceedthan3Nm;theoperating torqueforthetransmissionlockdrivenpartswithboltdrivenbyhandshallnotexceedthan3N·m,theoperatingtorquefor the transmission lock driven partswith boltdriven bykey shall not exceed than 1 . 2 N * { m } ;

2.Aftertheno-botgeardriventransmissionlockissubjectedtoatorqueof25Nm,allpartsandcomponentsshallnotbe brokenordamaged;Thetransmissonlockwithbolt:Whenthetouchingdrivecomponentoftheboltissubjectedto60N·m or25N·mtorque,andthedumbdrivecomponentoftheboltissubjectedto30N·mor2ON·mtorquethetransmissionlock shall be normally used and the operating force shallstillmeet the specified requirements.

3.Repeatedlyopenandclose2ootimes,code-named;repeatedlyopenandclose25ootimes,odemedIl; aftertheopeningandclosingcyclesbasedonrepeatedlyopeningandclosing frequencythecomponentsshallbeno distortion,nodeformationand notaffect the normal use.

Scope of application:

flat opening doorsand windows,sliding doors.

傳動鎖閉器系列MULTI-POINTTRANSMISSIONDEVICESERIES

JCH02

JCH03

雙向Bi-directional drive

JCH30-11

雙向Bi-directional drive <br>雙向Bi-directional drive

傳動鎖閉器系列MULTI-POINTTRANSMISSIONDEVICESERIES

雙向Bi-directional drive

JCH30-13

雙向Bi-directional drive

JCH30-15

雙向Bi-directional drive

JCH30-20

雙向Bi-directional drive

JCH30-25

傳動鎖閉器系列MULTI-POINTTRANSMISSIONDEVICESERIES

JCH30-27.5

雙向Bi-directional drive

JCH30-30

雙向Bi-directional drive

JCH03-35

單向Unidirectional

JCH15

傳動鎖閉器系列MULTI-POINTTRANSMISSIONDEVICESERIES

單向 Unidirectional

JCH32-11.5

單向Unidirectional

JCH32-25

單向Unidirectional

JCH32-30

傳動鎖閉器系列MULTI-POINTTRANSMISSIONDEVICESERIES

JCH35-10

雙向Bi-directional drive

閉窗器 WINDOWCLOSER

JBCH10L/R閉窗器 JBCH10L/RWindowCloser

JBCH10A-L/R閉窗器 JBCH10A-L/RWindowCloser

JBCH10B-L/R閉窗器 JBCH10B-L/RWindowCloser

CasementDoorLockAccessories 平開門鎖配件

雙面執手系列DOUBLESIDESHANDLESERIES

T

JCZM01

1.表面處理：氧化
2.雙面帶鎖，鎖芯孔距92mm；
3.配8\*8方軸，方軸長度=L（型材厚）+43mm；
4.配M5螺絲=L+15mm。
1.Surface treatment:Anodised
2.Lock on each side,cylinder pitch 92mm.
3.88 square shaft,shaft length= L(thickness ofprofile)+43mm.
4.Configure M5 screw=L+15mm

JCZM03

1.表面處理：氧化
2.雙面帶鎖，鎖芯孔距92mm；
3.配8\*8方軸，方軸長度=L（型材厚）+34mm；
4.配M5螺絲=L+12mm。
1.Surface treatment:Anodised
2.Lock on each side,cylinder pitch 92mm.
3.88 square shaft, shaft length= L(thickness of profile) +34mm.
4. Configure M5 screw= L+12mm.

JCZM08

1.表面處理：氧化
2.雙面帶鎖，鎖芯孔距92mm；
3.配8\*8方軸，方軸長度=L（型材厚）+45\~50mm；
4.配M5螺絲=L+15mm。
1.Surface treatment:Anodised
2.Lock on each side, cylinder pitch 92mm.
3.88 square shaft,shaft length= L(thickness ofprofile)+45-50mm.
4.Configure M5 screw= L+15mm.

JCZM09

1.表面處理：氧化
2.雙面帶鎖，鎖芯孔距92mm；
3.配8\*8方軸，方軸長度=L（型材厚）+45\~50mm；
4.配M5螺絲=L+15mm。
1.Surface treatment:Anodised
2.Lock on each side,cylinder pitch 92mm
3.88 square shaft,shaft length= L(thickness of profile) +45-50mm.
4.Configure M5 screw= L+15mm.

JCZM10

1.表面處理：氧化
2.雙面帶鎖，鎖芯孔距92mm；
3.配8\*8方軸，方軸長度=L（型材厚）+39mm；
4.配M5螺絲=L+15mm。
1.Surface treatment:Anodised
2.Lock on each side, cylinder pitch 92mm.
3.88 square shaft, shaft length= L(thickness of profile) + 39mm.
4. Configure M5 screw= L+15mm.

JCZM11

1.表面處理：氧化
2.雙面帶鎖，鎖芯孔距85mm；
3.配8\*8方軸，方軸長度=L（型材厚）+45mm；
4.配M5螺絲=L+15mm。
1.Surface treatment:Anodised
2.Lock on each side,cylinder pitch 85mm.
3.88square saft,shaftlength=Ltickness ofprofile)+45mm.
4.Configure M5 screw= L+15mm.

JCZM12

1.表面處理：氧化
2.雙面帶鎖，鎖芯孔距85mm；
3.配8\*8方軸，方軸長度=L（型材厚）+34mm；
4.配M5螺絲=L+12mm。
1.Surface treatment:Anodised
2.Lock on each side,cylinder pitch 85mm.
3.88 square shaft,shaft length=L(thickness ofprofile)+34mm.
4.Configure M5 screw= L+12mm.

干

JCZM12D

1.表面處理：粉末噴涂
2.雙面帶鎖，鎖芯孔距85mm；
3.配8\*8方軸，方軸長度=L（型材厚）+（42-45）mm
4.配M5螺絲=L+12mm。
1.Surface treatmentPowder coating
2. Lock on each side,cylinder pitch 85mm.
3.88 square shaft, shaft length= L(thickness ofprofile) +<42-45)mm
4.Configure M5 screw= L+12mm.

JCZM13

1.表面處理：氧化
2.雙面帶鎖，鎖芯孔距92mm；
3.配8\*8方軸，方軸長度=L（型材厚）+45\~50mm；
4.配M5螺絲=L+15mm。
1.Surface treatment:Anodised
2.Lock on each side,cylinder pitch 92mm.
3.88 square shaft,shaft length=L(thickness ofprofile)+45-50mm.
4.Configure M5 screw= L+15mm.

JCZM23

雙面執手系列DOUBLESIDESHANDLESERIES

JCZM25A

1.表面處理：粉末噴涂
2.雙面帶鎖，鎖芯孔距72mm；
3.配8\*8方軸，方軸長度=L（型材厚）+60mm；
4.配M5沉機=L+12mm。
1.Surface treatment:Powdercoating
2.Lock oneach sidecylinder pitch 92mm.
3.88 square shaft,shaft length= L(thickness of profile)+60mm.
4.Equipped with M5 sinker=L+12mm

JCZM28

1.表面處理：氧化
2.雙面帶鎖，鎖芯孔距85mm；
3.配8\*8方軸，方軸長度=L（型材厚）+（24-27）mm；
4.配M5螺絲=L+（8-17）mm。
1.Surface treatment:Anodised
2. Lock on each side,cylinder pitch 85mm.
3.88squaresha,satlegth=Lticknessofprofie)+(24-27)mm.
4.Configure M5 screw= L+(8-17)mm.

JCZM29

1.表面處理：氧化
2.雙面帶鎖，鎖芯孔距85mm；
3.配8\*8方軸，方軸長度=L（型材厚）+（15-18）mm；
4.配M5螺絲=L+（8-16）mm。
1.Surface treatment:Anodised
2.Lock on each side,cylinder pitch 85mm
3.88 square shaft, shaft length=L(thickness ofprofile) +(15-18)mm.
4.Configure M5 screw= L+(8-16)mm.

JCZM30

1.表面處理：氧化
2.雙面帶鎖，鎖芯孔距85mm；
3.配8\*8方軸，方軸長度=L（型材厚）+（18-20）mm；
4.配M5螺絲=L+（8-17）mmmm。
1.Surface treatment Anodised
2.Lock on each side,cylinder pitch 85mm
3.88square shaft,shaft length=L(thickness of profile)+（18-20）mm.
4. Configure M5 screw= L+(8-17)mm.

JCZM31

1.表面處理：氧化
2.雙面帶鎖，鎖芯孔距85mm；
3.配8\*8方軸，方軸長度=L（型材厚）+（25-32）mm；
4.配M5螺絲=L+（8-17)mm。
1.Surface treatmentAnodised
2.Lock oneach side,cylinder pitch 85mm.
3.88 square shaft,shaft length=L(thickness of profile) +（25-32）mmmm.
4. Configure M5 screw= L+ (8-17)mm mm.

JCZM32

1.表面處理：氧化
2.雙面帶鎖，鎖芯孔距85mm；
3.配8\*8方軸，方軸長度=L（型材厚）+（24-26）mm；
4.配M5螺絲=L+（8-17）mm。
1.Surface treatment:Anodised
2.Lock on each side,cylinder pitch 85mm.
3.88square shaft,shaftlength=L(thickness ofprofile)+（24-26）mm.
4.Configure M5 screw= L+(8-17)mm.

雙面執手系列DOUBLESIDESHANDLESERIES

JCZM33

1.表面處理：氧化
2.雙面帶鎖，鎖芯孔距85mm；
3.配8\*8方軸，方軸長度=L（型材厚）+（26-33）mm；
4.配M5螺絲=L+（8-17）mm。
1.Surface treatment:Anodised
2.Lock on each side,cylinder pitch 85mm.
3.88square shaft,shaft length= L(thickness ofprofile)+（26-33)mm.
4.Configure M5 screw= L+（8-17)mm.

JCZM36

1.表面處理：粉末噴涂
2.雙面帶鎖，鎖芯孔距85mm；
3.配8\*8方軸，方軸長度=L（型材厚）+80
4.配M5螺絲=L+12mm。
1.Surface treatment:Powder coating
2.Lock on each side cylinder pitch 85mm.
3.88 square shaft,shaft length= L(thickness ofprofile) + 80
4. Configure M5 screw= L+12mm.

JCZM39

1.雙面帶鎖，鎖芯孔距85mm；
2.配8\*8方軸，方軸長度=L（型材厚）+40mm；
3.配M5螺絲=L+16mm；
4.表面處理：粉末噴涂。
1.Double-sidedlocking，lockcylindercenter-to-centerdistance:85mm;
2.Fittedwith8X8squareshaft,saftlength=L(profilethicknes)+40mm;
3.Equipped with M5 screws=L+16mm overall length;
4.Surface treatment:Powdercoating。

鎖體 LOCKBODY

JST92系列

JST92B系列

JST4085B系列

鎖體 LOCKBODY

JST85B系列

JST3000鎖體

回 H 。 . . 0 日 22 M 4 @ 45 7038 . 9 H 3 T B □ G T 4 A 山 99
(s · 8 H 降 。 2.5 T H 品 2 1 34 29 49.5 44.5
0 產品名稱：鎖體T3485B JST2985B
C 00 產品材質：304不銹鋼面板+冷軋板
S 產品規格：JST3485B、JST2985B 表面處理：本色+鍍鋅 適用范圍：平開門 Product name: Lock body Material: Stainless steel 304 plate, cold+rolled sheet Szie:JST3485B、JST2985B Surface treatment: Natural color+ zinc plating Scope of application: Casement door

Surface treatment: Naturalcolor+zincplating Scope of application: Casement door

JST3000B鎖體

鎖體 LOCKBODY

JSTH01多點鎖體

JSTH01A多點鎖體

JCZMK01

CZMK23

CZMK35

JH30348-5

插銷系列FIUSHBOLTSERIES

JMX01

產品名稱：插銷
表面處理：珍珠鎳、黑、鍍鎳
適用范圍：平開門、平開窗
Product name: Flush bolt
Surface treatment:Peerl nickel, black, nickeling
Scope of application: Casementwindow& door
產品材質：插銷
表面處理：噴涂
適用范圍：適用于平槽口的平開門窗

Material: Flush Bolt Surface treatment: PowderCoating Scope of application:Suitable forcasementopening doors and windows with flat grooves

COLOR顏色 色 光 金色 PVD 古銅 色

產品材質：插銷
表面處理：噴涂
適用范圍：適用于平槽口的平開門窗

Material: Flush Bolt Surfacetreatment:PowderCoating Scope ofapplication:Suitable forcasement opening doors and windows with flat grooves

產品特點：

\*簡約時尚，極窄設計風格，超窄邊框；
\*開闊空間視野，多一份空間與寧靜輕松；
\*產品升級功能，防撞及自動開鎖專利設計；
\*節省空間、開啟面積大，運轉靈活；
\*安裝簡便，高超承重滑輪；

product feature:

\*modernstylish,Extremelynarrowdesignstyle,Ultranarrowprofile; \*Open space vision,more space and quietrelaxed \*Productupgradefunctionanti-collsionandautomaticlockpatentdesign; \*Spacesaving,largeopeningarea,flexibleoperation \*Easyto install,ultra highload bearing pulley

配置說明：

1.圖中配件的數量為單扇門配置；
2.拉手、滑輪有多種選擇可根據型材實配。
3.適用于室內隔斷門、陽臺門、廚房門等不同場所；

Configuration instructions:

1.The quantity of accessories in thefigure is forone sash doorconfiguration;
2.Variety option for handlesand rollers according to different profile system.
3.Suitableforindoorpartition,balcony,kitchenandotherdifferentplaces;

窄邊推拉門五金配置表(三軌聯動) NARROW DESIGNSLIDING DOOR HARDWARECONFIGURATION(THREE LINKAGE)

產品特點：

\*簡約時尚；極窄設計風格，超窄邊框；
\*直角升級功能，四邊均極致窄邊，并以斜面過渡；
\*產品升級功能，防撞及自動開鎖專利設計；
連動開啟，操作靈活便捷，開啟面積大又節省空間；
\*安裝簡便，高超承重滑輪；

product feature:

"Simple and stylish: extremely narrow design style,ultra-narrowframe;
\*Right-angleupgradefunction,allfoursidesareextremelynarrowdesign,andtakesthe inclined asa transition;
\*Productupgradefunction,anti-colisionand automaticunlockingpatentdesign;
Linkageopening,flexibleandconvenientoperation,largeopeningarea andspacesaving;
\*Easyinstallation,superload-bearingroller;

配置說明：

1.圖中配件的數量為三扇門配置；
2.拉手、滑輪有多種選擇可根據型材實配。
3.適用于室內隔斷門、陽臺門、廚房門等不同場所；

Configuration instructions:

1.The numberof accessoriesin the picture isa three-doorconfiguration; 2.There are manyoptions for handles and rollers,whichcan be matched according to the profile. 3.Suitable forindoor partition doors, balcony doors,kitchen doors and other places;

窄邊推拉門五金配件 NARROWFRAMESLIDINGDOORHARDWAREACCESSORIES

JZTM201-01A-L/R

Product name: lock seet Surface treatment: Oxidation/spraying

窄邊推拉門五金配件 NARROWFRAMESLIDINGDOORHARDWAREACCESSORIES

JZTM202-01B推拉門五金系統特性：

推拉門隱藏式緩沖五金 SLIDINGDOORHIDDENBUFFERHARDWARE

1、能有效減緩門扇關閉時的撞擊，并具自動回位的功能。
2、推拉門系統具有節省空間、開啟面積大，運轉靈活；單扇最大承重150kg。
3、本配置適用于帶入戶的陽臺推拉門中，拉手有多種選擇，可根據型材實配。
4采用條鎖啟閉，操作方便更具人性化。
5、實現了多點鎖閉，安全性更高。

Slidingdoorhardwaresystem features:

1.Thissystemhasself-returncapacitycanefectivelyreducethehitwhenthedoorisclosing.
2.Saves the space and operates flexiblymaximum load bearing ofeashsashis150kg.
3.Suitable for sliding door in balcony,multi choices for pull handle.
4.Uses sliding lock for opening andclosing.
5. Better security with multi point locks.

推拉門五金系統特性：

1、優美線條及人體工學舒適手感的外形執手；
2、具B級防盜功能的鎖閉系統、可調節鎖點設計；
3、高承重不銹鋼軌設計，具有大開啟面積和靈活的開啟；
4、滑輪最大承重：250Kg/組；

HARDWARESYSTEMCONFIGURATIONSCHEME

Slidingdoorhardwaresystem features:

1.Handle with elegant steamline and ergonomic tactile impression
2.Handle withelegant steamlineand ergonomictactile impression
3.Highload-bearing stainlesssteelrail,whichhaslarge openingareaandflexibleopening function
4.Maximum load of roller:25okG/pair

條鎖 SLIDINGLOCK

JSTG03A

JSTG04A

Code:JSTG05 Surface treatment: Anodization

Productname:Single SlidingLockCode:JSTG05ASurface treatment: Anodizztion扣手系列BUTTONSERIES

JSTG19A

產品名稱：單面扣手
產品編號：JSTG19A
表面處理：氧化
Product name: Single sided buckle
Code:JISTG19A
Surface treatment: Anodization 產品名稱：反面扣手
產品編號：JSTG18B
表面處理：氧化
Product name: Reverse buckle Code:JSTG18B
Surface treatment: Anodization

JML01

產品名稱：拉手 表面處理：氧化 Product name:Sliding doorhandle Surface treatment:Anodization

RollerSeries滑輪系列