該頁無縮略圖
Konex audio
IMPORTANTSAFETYINSTRUCTION
·Read these instructions-Allthe safetyand operating instructions should be read before this product is operated.
·Keep these instructions-The safety and operating instructions should be retained for future reference.
·Follow all instructions -All operating and use instructions should be followed.
WARNING!
·WARNING-Donot expose thebatteries (baterypackorbattries installed)toexcessiveheatsuchassunshine,fireorthelike fora long time.
·WARNING-To reduce the risk offire or electric shock,do not expose this apparatus to rain or moisture.The apparatus shall notbe exposed to dripping or splashing and that objects filled with liquids,such as vases,shall not be placed on apparatus.
·WARNING- do not cover.
·WARNING-onlyuseatachments/accessoriesspeciedbythemanufacturer(suchastheexclusivesupplyadapterbatteryetc)
·WARNING-theplugis the main disconnectdeviceandshouldbeusedassuch.Thedisconnectdevice shouldremain readily. accessible.
·WARNiNG- this active loudspeaker may emit high sound pressure levels.
·WARNiNG- do not listen too close to the active loudspeaker.
·WARNiNG-do not listen for an extended period of time at a high sound pressure level.
·WARNING-do not attmpt to remove theactive loudspeaker chasss,there are no user serviceable parts.
·WARNING-do not plug a guitar into the K-two\*.
·WARNiNG-do not insert body parts or objects into the bass port for risk of injury.
·DANGER-of dropping the product.
·DANGER-of sharp corners.
MOISTUREANDHUMIDITY
·The active loudspeaker should be located in a place free from moisture and water. ·Do not use this apparatus near water.Do not expose it to rain or dripping water.Do not splash water on it
INSTALLATION
·Do not install near any heat sources such as radiators,heat registers,stoves,or other apparatus (includingamplifiers) that produce heat. ·No naked flame sources,such as lit candles,should be placed on the active loudspeaker. ·Do not block any ventilation openings. Installin accordance with the manufacturer's instructions.
CONNECTION
·Connect the active loudspeaker according to the instructions in the manual.
·Connect the active loudspeaker only to the correct mains voltage as shown on the equipment.
·Protecthepowercordfrombeingwalkedonorpinchedparticularlyatplugs,conveniencereceptacles,andthepointwhere they exit the apparatus.
·Use onlypowercablesofthe type specified in theoperating instructions oras markedontheactive loudspeaker.Do not substitutetheseparate powercableincludedwiththisactiveloudspeakerwithanyotherpowersupply-useonlythepowercable provided by the manufacturer.
·Donotdefeatthesafetypurposeofthepolarizedorgrounding-typeplug.Apolarizedplughas twobladeswithonewiderthanthe other.Agroundingplughastwobladesandathirdgroundingprong.Thewidebladeorthethirdprongareprovidedforyoursafety. If theprovided plug doesnotfit into youroutlet,consult an electrician forreplacementof the obsoleteoutlet.
·Unplug this apparatus during lightning storms or when unused for long periods of time.
·Donotinstalinanarea thatimpedesaccess tothepowerplug.Disconnectingthepowerplugisteonlywaytocompletely remove power to the product and the plug must be readilyaccessible at al times.
CLEANING
· Clean only with dry cloth.
MAINTENANCE
·Referallservicingtoquaifiedservicepersonnel.Servicingisrequiredwhen theapparatushasbeendamagedinanywaysuch aspower-suplycordorplugisdamaged,liquidasbeenspiledorobectshavefallnintotheapparatus,thapparatushasben exposed to rain or moisture,does not operate normally,or has been dropped.
·Theinternalbatteryisuserreplaceableacording totheinstructionsinthismanual.OnlyusebattriesrecommendedbyKONEX Industries and intended for the K-two+active loudspeaker.
·CAUTION:Theseservicinginstructionsareforusebyqualifiedservicepersonnelonly.Toreducetheriskofelectricshockdonot perform any servicing unless you are qualified to do so.
COMPLIANCE
Thisdevicecompliesithpart5ofteCCules.Operatioisubjecttothefollwintwoconditios:(1)isdevicemayotcauseaful interference,and(2)thisdevicemustacceptaninterferencereceived,includinginterferencethataycauseudesiredation
FCC warning:
AnyChangesormodificationsnotexpreslyapprovedbythepartyresponsibleforcompliancecouldvoidtheuser'sauthoritytoopeatethe equipment.
Note:ThisequipmenthasbeentestedandfoundtocomplywiththelimitsforaClassBdigitaldevice,pursuanttopart15oftheFCCRules TheselimitsareesigedtoprovidasoableprotectioagistarmfulinterferenceinesidentialinstalltionThisequipmentate usesandcandateioed,ifotistalldddiodncithstrutiossefule toradioommntiosoweetreisaateeattefeeeillotuirtiata.Iftist causeharmfulinterferencetoadioortelevisionreception,whichcanbedeterminedbyturningtheequipmentoffandon,teuseris encouraged to try to correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from thatto which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
Thedevicehasbeenevaluatedtomtgeneral RFexposurerequirementThedevicecanbeusedinportableexposureconditionwithout restriction.
IC warning
Thisdevicecontainslicncexempttransmiter(s)eceivers)thatomplyithInovationcieceandconoicDevelopmntd licence-exempt RSS(s). Operation is subject to the following two conditions:
(1) This device may not cause interference.
(2)This device mustacceptanyinterference,including interference thatmaycauseundesiredoperationofthedevice.
CAUTION RISK OF ELECTRIC SHOCK DONOTOPEN WARNING:SHOCKHAZARD-DONOTOPEN DONOTEXPOSETHISEQUIPMENTTORAINORMOISTURE ATTENTION:RISQUEDECHOC ELECTRIQUE-NEPAS OUVRIR TENIRAL'ABRISDELAPLUIEETDEL'HUMIDITE
CAUTION:To preventtheriskof electricshock,donotremovecover (orback plate).Therearenouserserviceable parts inside.Referservicing to qualifiedservice personnel.
區(qū)
Thisapliancemaynotbetreatedasregularhousehold waste.ManagementofWEEE(Waste Electricaland Electronic Equipment)isappicableinmemberstatesof the European Unionandother Europeancountries with individual national policies on the managementofWEEE.Ifyouneed more informationon thecolection,reuseand recyclingsystems, please contact your local or regional waste administration facility.
CE
TheproductcomplieswiththefolowingEuropeandirectives:2015/35/EU(CE-LVD),2015/30/EU(CE-EMC),2014/53/EU(RED) 2011/65/EU,2015/863(ROHS).
1.KONEX K-two+ portable speaker x1
2.Wirelessmicrophone x1
3.Power cord x1
Model K-two+ Type 2-way configuration with active filter HF Driver Neodymium Tweeter LFDriver 4"woofer
Power (RMS) 50W
Power (MAX) 100W Functions Bluetooth version 5.3, USB, Aux Input, Bass, Treble, Pair button Aux Input 3.5mm Freq. Range 60Hz-20kHz( @ -10dB)
Power Supply DC 5V,3A Battery 11.1V/V2.6Ah (Lithium-ion) Dimensions 231x142x155 mm Net Weight 2.55kg
1.Power Switch
2.Volume Control
3.Bass Control
4.Treble Control
5.Bluetooth Pair Button (Short Press)/NextTrack(Long Press)
6.Microphone Priority (Short Press)/Previous Track (Long Press)
7.USB input indicator
8.BT pairing indicator
9.Aux input indicator
10.Battery indicator: The indicator lights up when the battery power is low.
11.Charging Indicator: The indicator lights up during charging and turns off when fully charged.
12.Power indicator
13.Aux input
14.USB input
15.TYPE-C charging cradle(DC 5V,3A)
16.Microphone voice changing (e.g.,baby voice,male/female voice switching,etc.)
17.Microphone volume up /volume down
18.Microphone power switch(need to long press to turn on)
19.Microphone charging port(TYPE-C,built-in lithium battery)
20.Scan the QR code to read the user manual
BLUETOOTHPAIRING
PAIRYOURDEVICE:
1- When POWER ON,the BT pairing indicator (8)is flashing quickly, pairing mode is automaticallyactivated.
2- Search for K-two on your device and connect. (this is for Audio Streaming function). The BT pairing indicator (8) will change to solid light. Once you will start to playback your music,this BT pairing indicator (8) will flash slowly.
Note: For devices with Android, please select 6 K-two when searching for Bluetooth.
NOTE:You cannot start a new pairing request while a device is already connected.You must disconnect the first device and then start pairing. Press the BT pairing button (5)to disconnect the current pairing.
USB
The Konex K-two+ portable speaker allows you to connect USB storage device such as a USB stick or harddrive.Hardrive format mustbe FAT32,FAT or exFAT format.
Connect your USB device on USB input (14),The USB device willbe automatically selected and the USB input indicator (7) will be light on.
AUX
The Konex K-two+ portable speaker allows you to connect any external audio source with LINE level audio signal.
Connect your audio device to the Aux input using a 1/8 Jack cable.The Aux input indicator (9) will be light on.
The Konex K-series is equipped with a long life lithium-ion battery.
If battery level is too low,check Battery indicator (10),you have to charge your Konex device. Shut down the device, then use supplied power cable to charge your device,charging time: 2.5 hours.
NOTE:You can use your Konex K-series player straight out from the box,but it is recommended to process a full charge of 2.5 hours before you use it the first time in order to get optimum battery life.
If the device is not used for a long time,please fully charge the battery every 3 months.
www.konexaudio.com
