无码日本精品蜜桃_九一精品无码一区_亚瑟中文字幕欧美_AV丝袜一区二区_AV丝袜一区二区_中文无码有码88_手机在线播放av_青青日中文字幕

SPHERICAL PLAIN BEARING

臨清市森豪軸承有限公司LINQINGSENHAOBEARINGCO.,LTD.

內求SEEK WITHIN目錄CATALOGUE

企業簡介 01 Company Profile
企業文化 03 Company Culture
企業榮譽 04 Company Honor
生產設備 05 Production Equipment
檢測設備 06 Testing Equipment
關節軸承的配合與公差 07 Fit And Tolerance
尺寸公差 10 Dimensional Tolerance
關節軸承的徑向游隙 13 Radial Internal Clearance Of Sphderical Plain Bearings
向心關節軸承選擇準則 15 Selection Of Radial Spherical Plain Bearings
角接觸關節軸承選擇準則 18 Selection Of Angular Contact Spherical Plain Bearings
推力關節軸承選擇準則 19 Selection Of Thrust Spherical Plain Bearings
桿端關節軸承選擇準則 20 Selection Of Rod Ends
關節軸承的安裝與潤滑 23 Mounting And Lubrication For Spherical Plain Bearings
關節軸承額定載荷與壽命計算 25 Kqbalcalculation Of Basic Load

Ratings And Service Life Of Spherical Plain Bearing

油潤滑向心關節軸承 Oil-lubricated Radial Ball Bearing

GE...ES(2RS) 36
GEG...ES(2RS) 37
GE...LO 38
GE...HO(2RS) 38
GEZ...ES(2RS) 39
GEGZ...ES(2RS) 40
GEWZ...ES(2RS) 41
GEF...ES 42
GEK...XS(2GS) 42
GEBK...S 43
GEBJ...S 43
COM... 44

自潤滑向心關節軸承 Self-lubricating Radial Joint Bearing

GE...ET(2RS) 45
GEG...ET(2RS) 46
GEZ...ET(2RS) 47
GE...ET(2RS/X) 48
GE...XT(2RS/X) 48
GE...C 49
GEG... 49
GE...PW 50
COM...T 51
GEH...HTL GEH..XTL(2RS) 52
GE...XF/Q 53
GEC..XF/Q 53
GEH...XF/Q 54
GEH...HF/Q 54

俄式關節軸承 Russian-style Ball Bearing

WCN 56
2山CN 57
2WC 57
6WCΛ 57
9WCN 58
EC 58
GWCI...K 58

角接觸/推力關節軸承 AngularContact/ThrustSpherical RollerBearing

GAC...S GAC...T 60
GACZ...S 61
GX...S GX...T 62

油缸耳環/桿端關節軸承 Cylinder EarRing/Rod End Joint Bearing

GIHR-K...DO 64
GIHN-K...LO 65
GAS 66
GIHN-K...DO 67
GF...DO 68
GF...LO 69
TS...NF 69
GK...DO 70
SI...ES(2RS) 71
SA...ES(2RS) SAS...ES(2RS) 72
SIG...ES(2RS) 73
SAG...ES(2RS) 74
PHS 75
POS 76
SI...C SI...ETL(2RS) 77
SA...C SA...ETL(2RS) 78
SI...T/K 79
SA...T/K 80
NH...T 81
NOS...T 82
LHSA...RS 83
CS 83
SQ...RS 84

小松配套專用關節軸承 85 KOMATSUAccessories

卡特彼勒配套專用關節軸承 86CATAccessories

向心關節軸承型號對照表 87BearingModel Comparison Table

桿端關節軸承型號對照表 88 Bearing Model Comparison Table

臨清市森豪軸承有限公司始建于2009年，坐落于山東省臨清市，坐擁“軸承之鄉”臨清完善的產業生態與便捷交通優勢，是一家集軸承設計、生產、經營及進出口業務于一體的現代化制造企業。

Linqing Senhao Bearing Co.,Ltd.was founded in 20o9 and is located in Linqing CityShandong Province.It enjoys the complete industrial ecosystem and convenienttransportationadvantages of Linqing,known as the "Hometown of Bearings".It is a modern manufacturing enterprise integrating bearing design，production, operation and import and export business.

潤滑型向心關節軸承 Lubricated radial joint bearing 自潤滑型向心關節軸承 Self-lubricating radial joint bearing 不銹鋼關節軸承 Stainless steel joint bearing 角接觸關節軸承 Angular contact joint bearing 推力關節軸承 Thrust joint bearing 油缸耳環軸承 Cylinderearringbearing

作為專業的高端關節軸承生產廠家，公司深耕核心領域，專注研發生產潤滑型向心關節軸承、自潤滑型向心關節軸承、角接觸關節軸承、推力關節軸承、油缸耳環軸承等系列產品，兼具高精度、低摩擦、大承載、長壽命等核心優勢，廣泛適配汽車、工程機械、水利機械、冶金鋼鐵、液壓油缸、氣動離合制動器等多元場景，更成為卡特、小松等工程車輛的優質配件供應商。公司旗下SNBAL品牌憑借可靠品質，產品遠銷亞洲、歐美、南美、澳大利亞等幾十個國家和地區，贏得全球市場的廣泛認可與贊譽。

公司占地10000平方米，配備先進的自動化生產設備、一流的檢測設備與優秀技術團隊，建立完善的品質控制體系并通過ISO9001質量體系認證，年產能力達500萬套，為產品穩定性提供堅實保障。

Asaprofessional manufacturerof high-end sphericalplain bearings,thecompanyhasbeendeeply engaged in core fields,focusing ontheresearchand development andproductionofa seriesof productssuchas lubricatedradialplain bearings,self-lubricating radialplain bearings,angularcontactsphericalplain bearings, thrust sphericalplainbearings,and cylinderring bearings.These products feature coreadvantages such as highprecision,lowfriction,largeloadcapacityandlongservicelife.Itiswidelyapplicabletovarioussenarios such asautomobiles,constructionmachinery，waterconservancymachinery，metalurgical steel，hydraulic cylinders,pneumatic clutchesand brakes,and_has becomea high-quality partssupplier forengineering vehiclesofbrandslikeCaterpilarandKomatsu.TheSBALbrandunderthecompany,withitsreliablequality hasits_productsexported to_dozensof countriesand regionsinAsia，Europe,America，South America, Australia,etc.,and has won wide recognition and praise in the global market.

The_companycoversan_areaof_10,ooo squaremeters，equippedwithadvancedautomatedproduction equipment,first-classtesting equipmentandanoutstanding technical team._It hasestablishedacomplete qualitycontrolsystemand passed the ISO 90o1qualitysystem certification.Theannualproduction capacity reaches 5 million sets,providing a solid guarantee for product stability.

臨清市森豪軸承有限公司HIGH-END SPHERICALPLAINBEARING高端關節軸承生產廠家

愿景 Vision

締造中國知名軸承品牌 Createawell-knownbearingbrandinChina

福

價值觀 Values

內求利他誠信創新 Seekwithin，benefitothers,behonestandinnovative

企業使命 Corporate Mission

為客戶創造價值，為員工創造未來 Create value for customersanda future for employees

服務理念 Service Philosophy

精益求精客戶至上嚴謹細致精誠合作
Strive for excellence, put customers first, be meticulous and rigorous,
andcooperatesincerely

企業榮譽COMPANYHONOR

金相顯微鏡Metallographic Microscope

測長儀 Length Measuring Instrument

光譜儀Spectrometer

硬度計、振動儀 Hardness Tester, Vibration Instrument

輪廓粗糙度儀 Profile Roughness Meter

圓度儀 Roundness Tester

05/06

關節軸承的配合與公差 FITANDTOLERANCE

在關節軸承內、外圈安裝時有一個適當?shù)倪^盈量，才能獲得滿意的徑向方位和支撐力。不恰當或錯誤的配合不僅會降低軸承的使用壽命通常也會對其他配件造成損害，由于配合不當會引起軸承的失效，如：

向心關節軸承內圈球面出現裂紋，早期剝落及球面位移；向心關節軸承內圈與軸或外圈與軸承座間因蠕動及磨蝕產生磨損：由于不正確的配合導致內部游隙值變小出現卡死或造成軸承燒傷：引起球面變形而導致噪聲值上升和旋轉精度的降低。

關節軸承的配合類型以及軸、孔公差帶

軸承與軸和軸承座孔的配合代號以及所選用的軸、孔公差帶應符合GB1800\~1804的規定，根據軸承內圈或軸圈)與軸配合的性質，軸頸直徑的極限偏差，在基孔制配合中選擇：

a.過盈和過度配合：
b.間隙配合：
軸和座孔公差帶與軸承內徑和外徑公差的相對位置如下圖所示：

軸配合公差

Generally speaking,satlsfactory radlal locationand adequate support can only be obtalned when the Innerand outerings are mounted with an approprlate degree of interference.Inadequately or incorrectly secured bearing rings maycause damage to the bearings and assoclated components.Therefore It Is necessary to make careful investigationin selecting a proper fit.Some of the bearlng fallures caused by Improper flt are llsted below:

Spherical surface cracking,early flaking and displacement of spherical surface Abrasion caused by creeping between bearing and shaft housing Seizing or overheating damage caused by negative internal clearances Increased nolse and deterlorated rotatlonal accuracy due to spherical surface deformation

The following table contains recommendations for suitable shaft and housing tolerances.

Shaftfits

Housing fits

關節軸承的配合與公差 FITANDTOLERANCE

軸徑公差

Shaftdiametertolerances

軸承座孔公差 Housing bore tolerances

1.向心關節軸承內圈

Innerringof spherical plain bearing

內圈高度公差

Innerringwidthtolerance

尺寸公差 DIMENSIONALTOLERANCE

2.向心關節軸承外圈 Outer ring of spherical plain bearing

外圈高度公差

Outerringwidthtolerance

3.桿端關節軸承內圈 Innerringofrodends

4.桿端關節軸承中心高偏差 Centre heightdeviation of rod ends

關節軸承的徑向游隙 RADIAL INTERNAL CLEARANCEOFSPHDERICALPLAINBEARINGS

1.向心關節軸承 Spherical plainbearing

2.桿端關節軸承 Rodends

向心關節軸承選擇準則SELECTIONOFRADIALSPHERICALPLAINBEARINGS

1、潤滑型向心關節軸承 Radial spherical plain bearings requiring maintenance

向心關節軸承選擇準則SELECTIONOFRADIALSPHERICALPLAINBEARINGS

角接觸關節軸承選擇準則 SELECTIONOFANGULAR CONTACT SPHERICALPLAINBEARINGS

角接觸關節軸承 Angularcontact spherical plain bearings

推力關節軸承選擇準則 SELECTIONOFTHRUSTSPHERICALPLAINBEARINGS

推力關節軸承 Thrust spherical plain bearings

桿端關節軸承選擇準則 SELECTIONOFROD ENDS

1、潤滑型桿端關節軸承 Rod ends requiringmaintenance

桿端關節軸承選擇準則 SELECTION OFROD ENDS

2、自潤滑型桿端關節軸承Maintenance-freerodends

關節軸承的安裝與潤滑

Mounting and lubrication for spherical plain bearings

1、負荷方向與開裂位置 Direction of Load and position of split

2、安裝簡例 Mounting example

3、安裝與拆卸 Mounting and dismounting

關節軸承的安裝與潤滑

Mounting and lubrication for spherical plain bearings

4、潤滑與維護 Lubrication and maintenance

5、密封 Sealing

關節軸承額定載荷與壽命計算

1、關節軸承額定靜載荷與當量靜載荷

關節軸承額定靜載荷的一般計算式為: \mathsf { C } _ { s = \lfloor \mathsf { p } \rfloor } \bar { \mathsf { c } } \mathsf { d } _ { \mathsf { m } } \mathsf { l } ( ±b { \varepsilon } )
① 、對向心關節軸承，在正常游隙條件下,公式可轉化為: \complement _ { s r } = fsCdm(N)
式中 \mathbf { f } _ { s } { = } \mathbf { f } _ { s } ( [ \mathbf { p } ] , ± , \mathbf { d } _ { m } ) 與軸承材料、結構型式、徑向游隙等因素有關，如下表列出了正常游隙下的fs值:

當向心關節軸承承受徑向和軸向聯合靜載荷時，其徑向當量靜載荷為 * P _ { r } = X _ { r } F _ { 1 } (N)，式中系數X與Fa/F值有關，如下表列出了X的取值：

② 、對角接觸關節軸承,徑向額定靜載荷為： \mathsf { C } _ { s r } \mathsf { = } \mathsf { f } _ { s } ( \mathsf { B } + \mathsf { C } - \mathsf { T } ) \mathsf { d } \mathsf { m } (N)式中系數fs見下頁表格：

當角接觸關節軸承承受徑向和軸向聯合靜載荷時，其當量靜載荷為： \mathsf { P } _ { \mathsf { r } } \mathsf { = X } _ { \mathsf { r } } \mathsf { \bar { a } } \mathsf { F } _ { \mathsf { l } } (N)，式中 \mathsf { X } _ { \mathsf { r a } } 按下表選?。?/p>

SNBAL CALCULATIONOFBASICLOAD RATINGSAND SERVICELIFEOFSPHERICALPLAINBEARING

1.Rated static load and equivalent static load of spherical plain bearing

The general calculation formula of rated static load of spherical plain bearing is: \mathbf { C } s = [ \mathbf { p } ] \mathbf { C } \mathbf { d } \mathbf { m } \mathbf { l } ( \mathbf { \varepsilon } )

① Fortheradialsphericalplainbearing,under theconditionof normalclearance,theaboveformulacanbeconverted as Csr=fsdm(N), \vDash fs([plε,dm),related to factors like bearingmaterial,structure type,radial clearanceand so on.The values offs under the condition ofnormal clearance are listed in the folowing table:

Whenthecombined loadof both radialandaxial directions isappliedon theradial spherical plain bearing,its staticequivalentradial load is: \mathsf { P r } = \mathsf { X } \mathsf { f } , (N),where:thecoefficientX related to Fa/F,the X'value is listed in the following table.:

② 、For the angular-contact spherical plain bearing,rated static radial load is given by:Csr \mathbf { \sigma } = \mathbf { \sigma } fs(B+C-T)dm (N) the values ofcoefficient fsare given in'the following table:

fs Values of angular-contact spherical plain bearing

Whenthecombined loadof both radial andaxial directions isappliedon theangular-contact spherical plain bearing,itsstatic equivalent load is:Pr \mathbf { \bar { \rho } } = \mathbf { \rho } XraFr(N),where:XraXrais giveninthe following table:

③ 、Forthrust spherical plain bearing,rated staticaxial load is: \mathsf { C } _ { s a } = \mathsf { f } _ { s } ( \mathsf { B } + \mathsf { C } - \mathsf { H } ) \mathsf { d } _ { \mathsf { m } } ( \mathsf { N } ) ，Where: coefficientfs isgiveninthe followingtable:

關節軸承額定載荷與壽命計算

當推力關節軸承承受徑向和軸向聯合靜載荷時，其當量靜載荷為： ±b { \mathsf { P } } _ { \mathsf { a } } = ±b { \mathsf { Y } } _ { \mathsf { a } } ±b { \mathsf { F } } _ { \mathsf { a } } 式中 ±b { γ _ { \mathsf { a } } } 按下表選?。?/p>

④ 、桿端關節軸承的額定靜載荷計算方法，應根據桿端關節軸承的結構型式來選擇。當桿端關節軸承為向心型時，可采用向心關節軸承的額定靜載荷計算公式計算。當桿端關節軸承為球頭型時，可采用推力關節軸承的額定靜載荷計算公式計算。另外還應考慮桿體材料的屈服強度極限。當軸承的額定靜載荷超過桿體材料的屈服強度的許用值時，應取桿體材料屈服強度極限的許用值作為計算桿端關節軸承的額定靜載荷。

2、關節軸承額定動載荷與當量動載荷

① 、向心關節軸承的徑向額定動載荷為：Cdr * = frCdm(N)

式中系數fr與軸承摩擦副的材料、結構型式、徑向游隙等因素有關，下表列出了正常游隙下f值：

當向心關節軸承承受不變的徑向和軸向聯合載荷時，其當量動載荷為 : \mathsf { P } = \mathsf { X } _ { \mathsf { r } } \mathsf { F } _ { \mathsf { I } } (N)，式中系數 \mathbf { x } _ { { { r } } } 與 F _ { 2 } / F _ { r } 值有關， \mathbf { X } _ { \Gamma } 的取值與當量靜載荷中 \mathbf { X } _ { \Gamma } 取值相同。

② 、角接觸關節軸承的額定動載荷 \mathsf { C } _ { \mathsf { d r } _ { \prime } } 為： \mathsf { C } _ { \mathsf { d r } } = \mathsf { f } _ { \mathsf { r a } } \bigl ( \mathsf { B } + \mathsf { C } - \mathsf { T } \bigr ) \mathsf { d } _ { \mathsf { m } } ( \mathsf { N } ) 式中系數fra與軸承摩擦副材料及結構尺寸有關，如下頁表格列出fra值

當角接觸關節軸承承受不變的徑向和軸向聯合載荷時，其當量動載荷為： \scriptstyle { \mathsf { P } } = \mathbf { X } _ { \mathsf { r a } } { \mathsf { F } } (N)，式中Xra的取值與當量靜載荷中Xra取值相同。

SNBAL CALCULATION OFBASICLOAD RATINGSAND SERVICELIFEOFSPHERICALPLAINBEARING

When the combined load of both radial and axial directions isapplied on the thrust spherical plain bearing,its static equivalent load is: ±b { \mathsf { P a } } \mathbf { = Y } \mathbf { _ { a } } ±b { \mathsf { F } } \mathbf { _ { a } } ,where: ±b { γ _ { \mathsf { a } } } is given in the following table:

④ The computationmethodofrated staticloadforrod endbearingshouldbeselectedaccording tothestructuretypeofrod endbearing.Iftherodendbearingisofradialtypeitcanbecalculatedbytheratedstaticloadformulaofradialsphericalplain bearing.lftherodendbearingisofballjointtype,itcanbecalculatedbytheratedstaticoadformulaofthrustsphericalplain bearing.inaddition,theyieldstrengthlimitofbodymaterialshouldbeconsideredWhenthestaticloadratingofspherical plainbearingexceedstheallowablevalueofteyieldstrengthlimitofbodymaterialthealowablvalueofteyieldstrength limitofbody materialshould beselectedasthe basis of calculating therated staticload ofrodendbearing.

2. Rated dynamic load and equivalent dynamic load of spherical plain bearing

① . 、Therated dynamic radial load of the radial spherical plain bearing is: \mathbf { C } _ { { d r } } { = } \mathbf { f } _ { r } \mathbf { C } \mathbf { d } \mathbf { m } ( \mathbf { N } ) （204號 where: frrelated to the factorssuch asmaterialoffriction pair,structure type,radialclearanceand so on.Thevalues offr under the condition of normal clearance are listed in the following table:

When the invariable combined load in both radial and axial direction isapplied on the radial spherical plain bearing,itsdynamic equivalent load is: P = X _ { 1 } F (N),where the coefficient \mathbf { x } _ { { { r } } } isrelated with \mathsf { F } _ { \mathsf { a } } / \mathsf { F } _ { \mathsf { r } _ { \prime } } theXrvalueisthesameasthe \mathbf { X } _ { \Gamma } rvalue inequivalentstaticload formula

② .The rated dynamic load \mathsf { ±b { C } } _ { \sf d r } of angular-contact spherical plain bearing is: \mathsf { C } _ { \mathsf { d r } } = \mathsf { f } _ { \mathsf { r a } } ( \mathsf { B } + \mathsf { C } - \mathsf { T } ) \mathsf { d } _ { \mathsf { m } } ( \mathsf { N } ) , where the coefficient fra is related to the material offriction pairand bore diameterof the bearing, fra values are listed in the following table:

When the invariable combined load in both radial and axial direction is applied on the angularcontact spherical plainbearing,its equivalent dynamic load is: ±b { \mathsf { P } } \mathbf { = } ±b { \mathsf { X } } _ { \mathsf { r a } } ±b { \mathsf { F } } _ { \mathsf { r } } ( ±b { \mathsf { N } } ) ,where the coefficient Xra ravalue is thesameas the \mathsf { X } _ { \mathsf { r a } } ravalue instatic equivalent load formula.

關節軸承額定載荷與壽命計算

③ 、推力關節軸承軸向額定動載荷 \mathbf { \hat { C } } _ { \mathbf { d a } } 為 C _ { { d a } } = f _ { { a } } ( \mathbf { B } + \mathbf { C } - \mathbf { H } ) { d } _ { { m } } (N)式中系數fa與軸承摩擦副材料及結構尺寸有關，如下表所示：

當推力關節軸承承受不變的徑向和軸向聯合載荷時，其當量載荷為： ±b { \mathsf { P } } ±b { \mathsf { = Y } } ±b { \mathsf { _ { a } F } } ±b { { _ { a } ( N ) } } ，式中Ya取值與當量靜載荷中Ya取值相同。

④ 、桿端關節軸承的額定動載荷計算方法，應根據桿端關節軸承的結構型式來選擇。當桿端關節軸承為向心型時，可采用向心關節軸承的額定動載荷計算公式計算。當桿端關節軸承為球頭型時，可采用推力關節軸承的額定動載荷計算公式計算。

⑤ 、當關節軸承在一個擺動周期內承受變動載荷時，其當量動載荷為:

3、關節軸承壽命計算方法

關節軸承的壽命是指它的摩擦系數達到規定的極限值或軸承的磨損量超過規定的極限值時，軸承工作擺動的總次數。關節軸承的壽命與軸承的承載能力和使用條件有關。

關節軸承的球面滑動速度為: \mathbf { v } { = } 2 . 9 0 8 9 { x } 1 0 ^ { - 4 } 1 βfdm(mm/s)，式中 d _ { m } = \xi { d _ { m } } ，折算系數的值如下表:

關節軸承中的名義接觸壓力為： \mathsf { P } \equiv \mathsf { k } / { \mathsf { P } } { \mathsf { C } _ { { d } } } ( \mathsf { N } / \mathsf { m } \mathsf { m } ^ { 2 } ) ，式中耐壓系數k如下

關節軸承工作表面的pv值必須加以限制，否則軸承會過熱，導致軸承壽命縮短，pv值計算公式為：

SNBAL CALCULATIONOFBASICLOAD RATINGSAND SERVICELIFEOFSPHERICALPLAINBEARING

3、The rated dynamic load ±b { C } _ { { d a } } of thrust spherical plain bearing is: C _ { { d a } } = f _ { { a } } ( \mathsf { B } + \mathsf { C } - \mathsf { H } ) \mathsf { d } _ { \mathsf { m } } (N),where the coefficientfaisrelated to thematerial offrictionpairand bore diameter of thebearing,fa valuesare listedout in the following table: fs Values of thrust spherical plain bearing

When the invariable combined load inboth radialand axial direction isapplied on the thrust spherical plain bearing,itsequivalent load is: ±b { \mathsf { P } } \mathbf { = } ±b { \mathsf { Y } } \mathbf { \bar { a } } ±b { \mathsf { F } } \mathbf { a } ( ±b { \mathsf { N } } ) ,where the ±b { γ _ { \mathsf { a } } } value is the same as the ±b { γ _ { \mathsf { a } } } value in static equivalent load formula.

④ 、Thecomputational method of rated dynamic load of rod end bearing should be selected according tothestructuretypeofrodendbearing.Iftherodendbearingisofradialtype,itcanbecalculated bythe rateddynamicload formulaofradial spherical plainbearing.If therod endbearing isofballjoint type,it canbecalculated bythe rated dynamicloadformula of thrust sphericalplain bearing.

⑤ 、when the variable dynamic load is applied on the spherical plain bearing inaswing period,its equivalent dynamic load is:

3. Computational method of spherical plain bearing life

Spherical plain bearing life means,when the friction coefficient reaches thestipulated limit value or the wear loss exceeds the stipulated limit value,the total times that bearing swings.The spherical plain bearing life is related to load capacityand working conditions.

The slide speed of spherical working surface is: \mathbf { v } { = } 2 . 9 0 8 9 { x } 1 0 ^ { - 4 } β \mathbf { f } \mathbf { d } _ { { m } } ( \mathsf {mm } / s ) , where: d _ { m } = \xi { d _ { m } } , thevalues of convert coefficient \xi are listed in the following table:

The nominal contact pressure of spherical plail bearing is: \mathsf P = \mathsf k / { \mathsf P } { \mathsf C _ { \mathsf d } } ( \mathsf N / \mathsf { m } \mathsf { m } ^ { 2 } ) where:pressure resistant coefficientk isas follows :

Values of pressure resistant coefficient k

The pv value of working surface of spherical plain bearing must be restricted,otherwise bearing would be overheated, resulting in shorter life,the formula to calculate pv value is :

關節軸承額定載荷與壽命計算

關節軸承壽命計算:關節軸承的計算磨損壽命L為：

SNBAL CALCULATIONOFBASICLOAD RATINGS AND SERVICE LIFE OF SPHERICAL PLAIN BEARING

The restricted ranges of pv value of diferent material friction pairsare listed in the following table:

Calculation of spherical plain bearing life :

The computational wear life of spherical plainbearingLis :

The coefficientsin the formulaare listed inthe following table.

關節軸承額定載荷與壽命計算

對于需要維護的關節軸承，應定期更換軸承中的潤滑劑，此時軸承的壽命估算方法為：LR=αnαβL (擺次)式中系數 α _ { h } 、 α _ { β } 取值如下表：

當關節軸承在分段載荷工作下，其壽命計算為：

式中：Ti一第i段載荷的作用時間；Li一第i段載荷下的計算壽命；nT=T/∑Tii=1n一載荷的分段數

SNBAL CALCULATION OFBASIC LOAD RATINGSAND SERVICELIFEOFSPHERICALPLAINBEARING

For the spherical plain bearing that needs maintenance,the lubricant should be replaced periodically,
herein estimating method of the bearing life is: V _ { R } = \arctan α _ { B } L (swing circles),
where:coefficient α _ { h } 、 α _ { β } is given by following table:

If the spherical plain bearing served undera segmented loading,its life can be calculated by the where:Ti— The acting time of i-th loading segment; Li— The calculating life of -th loading segment; n T=T/∑Ti i=1 n— Number of Load Segments

向心關節軸承RADIAL JOINT BEARING

向心關節軸承是由帶有內球面的外圈禾 □帶有外球面的內圈構成一對滑動摩擦副，主要用于機械同心度要求不高，工作表面壓力較大且又要做低速擺動、傾斜或迥轉運動的機械機構中。向心關節軸承的滑動摩擦副可由不同材料組成，主要有兩種：潤滑型(鋼對鋼)向心關節軸承和自潤滑向心關節軸承。

潤滑型(鋼對鋼)向心關節軸承滑動表面一般經過淬火，磷化和涂敷二硫化鉬，具有耐磨損、抗腐蝕的特點。這種軸承在正常情況下，周期性潤滑是必須的。由于滑動表面具有很高的強度，這種軸承特別適合于承受交變重載、沖擊載荷和靜態重載。

The radial jointbearing is composed of anouter ring withan inner spherical surfaceandan inner ring with anouter spherical surface, forming a pair of sliding friction components.It is mainly used in mechanical mechanisms where the concentricity requirementsare not high, the working surface pressureislarge,and low-speed oscillation,inclinationorrotationmovementsneedtobeperformed. Thesliding frictioncomponentsof the radial jointbearing canbemadeof differentmaterials,mainly including two types: lubricated type (steel onsteel) radialjointbearingsand self-lubricating radial joint bearings.

The sliding surfaces of the lubricated (steel-on-steel) radial joint bearings are generally hardened, phosphatedand coated with molybdenum disulfide,featuring wear resistance and corrosion resistance. Under normal circumstances, periodic lubrication is necessary for these bearings. Due to the high strength of the sliding surfaces,these bearingsare particularly suitable for withstanding alternating heavyloads,impactloadsandstaticheavyloads.

油潤滑向心關節軸承RADIALSPHERICALPLAINBEARINGGE...ES(2RS)

油潤滑向心關節軸承RADIALSPHERICALPLAINBEARINGGEG...ES(2RS)

油潤滑向心關節軸承RADIALSPHERICALPLAINBEARING

GE...LO

GE...HO(2RS)

油潤滑向心關節軸承RADIALSPHERICALPLAINBEARINGGEZ...ES(2RS)

油潤滑向心關節軸承RADIALSPHERICALPLAINBEARINGGEGZ...ES(2RS)

油潤滑向心關節軸承RADIALSPHERICALPLAINBEARINGGEWZ...ES(2RS)

油潤滑向心關節軸承RADIALSPHERICALPLAINBEARINGGEF...ES GEK...XS(2GS)

油潤滑向心關節軸承RADIALSPHERICALPLAINBEARING

GEBK...S GEBJ...S

油潤滑向心關節軸承RADIALSPHERICALPLAINBEARING COM...