該頁無縮略圖
01 Bench-top Planetary Ball Milling Machine
1. Introduction
The compact planetary ball milling machine is used for
laboratories requiring precise material processing. This
machine excels at mixing and grinding a variety of
materials, offering the flexibility to choose from different
milling jar materials based on experimental demands.
2. Key Features
● High efficiency, very fine output granularity.
● Milling 4 different materials simultaneously.
● Rotating speed is adjustable.
● Grinding jars available in different material.
3. Technical Parameters
Model
Voltage
Container volume
Max loading
Container qty
Feeding material
Max working time
Speed
Dimension
Weight
STC-XQM-2A
AC220V±10%, 50Hz
500ml per container, other size is available
2/3 of milling container volume
4 pcs
Soft and crispy material≤10mm, other material≤3mm
72hrs
Revolution:35~355rpm,Rotation: 70~670rpm
L750 * W470 * H564mm
80kg
02
One-stop Solution Provider for Battery Research
Agate Mortar and Pestle Powder Grinder
1. Introduction
This desktop agate mortar and pestle powder grinder is
engineered for small-batch research, this agate mortar
and pestle powder grinder offers automated grinding
with precise speed control. Features removable bowls
for easy cleaning and achieves micron/nanoscale
particle size, ideal for ceramic material preparation.
2. Key Features
● Grinding time can be set using the automated controller.
● Minimum granularity can be as small as microns even
nanometers.
● It is an ideal grinding equipment for small batch of
micro powders in laboratories.
● It also can be used in the glovebox.
3. Technical Parameters
Model
Voltage
Grind bowl diameter
Grind bowl depth
Grind bowl rotate speed
Grind bowl material
Grind rod rotate speed
Grind rod material
Grinding time
Dimension
Weight
STC-XFM-A120
AC220V±10%, 50Hz
φ120mm
34mm
10rpm
Agate
20~90rpm
Agate
0~900min
L240 * W240 * H500mm
12kg
Lab Vacuum Slurry Mixing Machine
1. Introduction
This vacuum mixer is widely used for battery slurry
preparation, powder and ceramic material mixing
under vacuum condition effectively eliminating gas
bubbles to ensure a homogenous mix.
2. Key Features
● Equipped with an integrated vacuum pump.
● Mixing container of various sizes are available for
selection, with easy replacement option.
● Selectable speeds accommodate a variety of
processes and viscosities.
● Soft sealing technology offers excellent sealing
performance.
3. Technical Parameters
Model
Voltage
Power
Mixing rotation speed
Mixing container
Mixing time
Mixing paddle
Vacuum degree
Vacuum pump
Dimension
Weight
STC-EBJ-150
AC220V±10%,50Hz
150W
Max1400 rpm adjustable
150ml container as standard,50ml,100ml, 250ml, 500ml optional
0~99.99 hrs settable
150ml container is single shaft
> -80Kpa
Built-in type
L245 * W260 * H490mm
15kg
03
One-stop Solution Provider for Battery Research
04
Dual-shaft Planetary Vacuum Slurry Mixer
1. Introduction
This planetary mixing machine, integrated with vacuum
mixing and dispersion capabilities, is specifically tailored
for homogeneous mixing of battery slurries, as well as
powder and ceramic materials, ensuring a more uniform
and consistent mix.
2. Key Features
● Standard configuration with dual-shaft planetary mixing.
● It allows for multi-segment speed operation, with the ability
to set the mixing speed and duration for each segment.
● Equipped with an integrated vacuum system.
● Touch screen allows easy parameter setting.
3. Technical Parameters
STC-EXJ-500
AC220V ±10%, 50Hz
200W
Max 1000 rpm/min, 4 segments programable
0~600 min settable
500ml container is standard,
150ml /250ml /500ml containers optional
Built-in type
L330 * W320 * H570mm
35kg
Model
Voltage
Power
Mixing rotation speed
Mixing time
Mixing container
Vacuum pump
Vacuum degree
Dimension
Weight
-80KPa
05 Battery Slurry Planetary Vacuum Mixer
1. Introduction
This battery slurry mixing machine is suitable for
mixing and dispersing the powder and liquid of
various lithium-ion batteries, and obtains evenly
mixed battery slurry, and is suitable for high-viscosity
technical processes.
2. Key Features
● Advanced temperature alarm system for enhanced
safety and intelligence.
● Operation failure stop: the frequency converter is
self-provided with overload, overcurrent, overvoltage,
leakage of electricity.
● Variable cross-section non-prismatic mixing design
can make slurry get better mixing effect.
● Water cooling machine are available as an optional
choice.
3. Technical Parameters
Model
Voltage
Effective bucket volume
Bucket inner depth
Linear speed of mixing propeller
Mixing propeller speed
Dispersion speed
Bucket ambient temp
Dimension
Weight
STC-EXJ-5L
AC380V±10%, 50Hz
2.7-5L, other volume is optional
180mm
0.06-0.6m/s
10-98rpm
610-6100rpm
-10～+120°C
L1463 * W610 * H1770mm
700kg
One-stop Solution Provider for Battery Research
Planetary Centrifugal Mixing Degassing Machine
1. Introduction
The planetary vacuum centrifugal mixer integrates
mixing and degassing functions, enabling efficient
processing of various liquid and powder materials,
including battery powders, electrode slurries, carbon
nanotubes, and nanomaterials.
2. Key Features
● Equipped with double mixing containers to achieve
more capacity.
● The centrifugal force of rotation and the revolution
cause convection to homogenize the sample material.
● Using vacuum pressure can effectively degassing
sub-micron bubbles in the material.
● No contact, no mixing blade and minimize pollution.
3. Technical Parameters
06
Model
Voltage
Standard container
Max processing capacity
Max rotation speed
Viscosity
Dimension
Weight
STC-ETP-300
AC220V±10%, 50Hz
150ml *2pcs (φ60 * H75mm), 10ml,30ml, 50ml, 100ml
container is available
150g * 2
2000rpm
Max 300,000cps
W300 * H490 * D370mm
30kg
Compact Slurry Filter System
1. Introduction
This slurry filtering machine is used for sample testing
in lab, which is applied in filtering various hard particles
whose size is more than 124μm in slurry.
2. Key Features
● Precision filtration capability, achieving a maximum
particle size exclusion of 124μm.
● Constructed from corrosion-resistant SUS304
stainless steel, and facilitating clean process.
● The filter screen can be configured with different
mesh sizes according to requirements.
● Featuring a compact design for space efficiency,
simple operation.
3. Technical Parameters
STC-EGL-500
AC220V±10%, 50Hz
150 meshes is standard, Below 1000 meshes is optional
3L/min
65Kpa
500ml
L270 * W110 * H260mm
4kg
07 Model
Voltage
Filtering net
Air pump flow
Absolute vacuum
Volume
Dimension
Weight
One-stop Solution Provider for Battery Research
Magnetic De-ironing Filtering Machine
1. Introduction
This de-ironing filtration system is used for optimizing
the condition of slurry before the coating process.
Different meshes of filter net is optional to accommodate
user specific requirements.
2. Key Features
● Stainless steel design, good corrosion resistance,
easy clean.
● Equipped with an embedded magnet for iron particle
removing, and detachable magnet for easy cleaning
and maintenance.
● Optimize the particle fineness to improve the
consistency of coating.
● Compact design makes it perfect for lab use.
3. Technical Parameters
08
Model
Voltage
Working application
Processing capacity
Vacuum degree
Iron removal capacity
Slurry condition
Dimension
Weight
STC-ELC-5L
AC220V±10%, 50Hz
Vacuum filtration, iron remove, intermittent treatment
5L per time
Absolute vacuum -65kpa
8000~10000Gs
Viscosity recommendation≤20000CP,Solid content: ≤80%
L550 * W300 * H1000mm
37kg
Automatic Vacuum Film Coating Machine
1. Introduction
This compact film coater is extensively used in all kinds
film coating research, like ceramic films, crystal films,
lithium battery electrode coating, etc.
2. Key Features
● Touch screen operation, high automation.
● Vacuum aluminum chuck is designed for quick suction
of substrate.
● Coating stroke length is adjustable.
● Coating speed can be set, allowing for precise control
over the coating process.
3. Technical Parameters
STC-TM-300
AC220V ±10%, 50Hz
300mm adjustable customized size is available
100 & 150mm width optional,
fixed width & adjustable width optional
0~5mm adjustable
L415 * W200 * H23mm
Built-in type
0~100mm/s adjustable
L550 * W310 * H330mm
50kg
09 Model
Voltage
Max coating stroke
Coating thickness
Vacuum chuck
Vacuum pump
Coating speed
Dimension
Weight
Doctor blade
One-stop Solution Provider for Battery Research
Desktop Battery Electrode Film Coater
1. Introduction
This heat electrode film coating machine is used for
lithium battery electrode coating. It is designed with
top cover heating mechanism, the heating temperature
is up to 130℃ adjustable and digital displayed.
2. Key Features
● A temperature protection device has been added: if the
sensor fails, heating will automatically stop once the
set temperature is reached.
● Vacuum aluminum chuck is designed for quick suction
of substrate.
● It can be used in glovebox and easy to operate.
● Heating temperature is up to 130℃ and adjustable.
3. Technical Parameters
10
Model
Voltage
Max coating stroke
Doctor blade
Coating thickness
Vacuum pump
Coating speed
Heating method
Heating temperature
Dimension
Weight
STC-TMH-T300
AC220V±10%, 50Hz
300mm length is adjustable, customized size is available
100 & 150mm width optional,
fixed width & adjustable width optional
0~6mm adjustable
Built-in type
0~120mm/s adjustable
Top cover heater
RT~130℃, digital display, accuracy±2℃
L560 * W420 * H370mm
50kg
Lab Tape Casting Coater with Drying Cover
1. Introduction
The laboratory coating machine is designed for lithium
battery electrode coating and controlled heating
processes. It ensures precise coating thickness, stable
operation, and consistent performance for research and
development applications.
2. Key Features
● User-friendly design, ideal for laboratory research and
small-scale production.
● Vacuum aluminum chuck is designed for quickly suction
of substrate.
● The maximum coating length is 800mm, and customized
coating lengths are available upon request.
● Built-in type vacuum pump, high integration.
3. Technical Parameters
STC- TMH-T800
AC220V±10%, 50Hz
800mm length adjustable, customized size is available
100 & 150mm width optional
fixed width & adjustable width optional
0~3.5mm adjustable
0~120mm/s adjustable
RT~130℃, digital display
L1000 * W350 * H320mm
70kg
11 Model
Voltage
Max coating stroke
Doctor blade
Coating thickness
Coating speed
Heating temperature
Dimension
Weight
One-stop Solution Provider for Battery Research
Bottom Heating Vacuum Film Coating Machine
1. Introduction
This tape casting coater is developed for lithium battery
electrode preparation, providing reliable and uniform
coating performance. Equipped with a bottom heating
system, the temperature can be adjusted up to 130°C
with a digital display for accurate monitor.
2. Key Features
● User-friendly control interface for easy parameter setting.
● Vacuum aluminum chuck is designed for quick suction of
substrate.
● Bottom heating system ensures uniform temperature
distribution for consistent and efficient drying.
● Compact and space-saving structure, suitable for
laboratory environments and research applications.
3. Technical Parameters
12
Model
Voltage
Max coating stroke
Coating thickness
Coating speed
Heating temperature
Dimension
Weight
STC- TMH-B300
AC220V±10%, 50Hz
300mm length adjustable, customized size is available
0~5mm adjustable
0~120mm/s adjustable
RT~130℃, digital display, accuracy±1℃
L550 * W350 * H320mm
50kg
Doctor blade
100 & 150mm width optional
fixed width & adjustable width optional
Compact Lab Slot Die Extrusion Coater
1. Introduction
This slot die coating machine offers high-precision
coating with superior thickness uniformity. Various
configurations are available, including optional top
cover heating or bottom heating systems to
accommodate different users production needs.
2. Key Features
● Feeding by plunger pump, the coating is sealed during
extrusion coating, which is less affected by
environment and low waste.
● Easy to dismantle clean the coating blade and slurry
feeding system.
● Electric driven the blade coating, coating speed is
stable, adjustable.
● Small size, can be used inside glovebox.
3. Technical Parameters
STC-TMJ-T300S
AC220V±10%, 50Hz
Slot extrusion film coating
300mm length adjustable, customized size is available
0.5~20mm/s
0~5mm adjustable
Max 50ml
0.05~5mm/s
RT~130℃, digital display, accuracy±1℃
L560 * W420 * H370mm
65kg
13 Model
Voltage
Coating mode
Coating stroke
Coating speed
Coating thickness
Syringe volume
Feeding speed
Heating temperature
Dimension
Weight
One-stop Solution Provider for Battery Research
Auto Transfer Roll to Roll Film Coating Machine
1. Introduction
This roll-to-roll film coater is designed for continuous
and intermittent coating applications, providing stable
performance and high coating precision.
2. Key Features
● Continuous and intermittent coating methods can be
switched freely.
● Tension control, it’s equipped with correction device.
● Lower & upper blowing heating oven with optimal
drying results.
● Comma coating blade metering and precision
adjustment mechanism to ensure high coating accuracy.
3. Technical Parameters
14
Model
Voltage
Effective coating width
Substrate thickness
Coating speed
Coating accuracy
Heating temperature
Heating oven
Coating size accuracy
Dimension
Weight
STC-TMZT-300
AC380V±10%, 50Hz
Within280mm
Aluminum foil: 8~30μm Copper foil: 8~30μm
0~0.5m/min, depends on the heating condition
±3μm
RT~150℃
1m length, customized length is available
L≤±1mm, W≤±0.5mm
L1700 * W1000 * H1100mm
800kg
Multiple Heating Ovens Roll to Roll Coater
1. Introduction
The intermittent coating machine is a three-roller
transfer coating system designed for both continuous
and intermittent coating processes. It is easy to operate
and suitable for various substrates, especially for the
lithium-ion battery industry.
2. Key Features
● Each part of drying cabinet is equipped with
independent temperature control function.
● Continuous and intermittent coating can be changed
freely.
● Gap tracking system for double side coating.
● Solvent recovery processing device is optional.
3. Technical Parameters
15 Model
Voltage
Effective coating width
Coating accuracy
Coating speed
Oven temperature
Oven length
Oven quantity
Coating size accuracy
Dimension
Weight
STC-TMZT-300F2
AC380V±10%, 50Hz
Within 350mm
±3μm
1.5~3m/min, depends on heating condition
RT~150℃, temperature difference in the oven ≤±2.5℃
1.5m/pcs, oven length can be customized
total 2pcs oven
L≤±1mm, W≤±0.5mm
L5000 * W1300 * H1800mm
1900kg
One-stop Solution Provider for Battery Research
16
High Accuracy Slot Extrusion Film Coater
1. Introduction
This high accuracy slot extrusion film coater is used for
applied to the surface coating of sheet substrates.
It adopts the slot extrusion film coating, and is widely
used in various high-temperature film coating research.
2. Key Features
● Adopt large area uniform heating to ensure the
temperature control high accuracy of the substrate.
● Flat plate coating, motor driven slot extrusion die coating,
with stable and adjustable coating speed.
● Integrated automatic feeding system to realize the
linkage between functions.
● PLC large size touch screen control, easy to set
parameters.
3. Technical Parameters
Model
Voltage
Effective coating area
Coating speed
Coating thickness
Coating accuracy
Heating temperature
Vacuum chuck
Dimension
Weight
STC-TMJ-300SA
AC220V±10%, 50Hz
L300mm * W200mm
0~120mm/s adjustable
0~5mm, adjustable by micrometer
±3μm
RT~150℃, digital temperature controller
L385 * W300 * H29mm
L1000 * W600 * H710mm
110kg
17 NMP Solvent Recovery System
1. Introduction
This NMP filtration machine applied for the filtration
treatment of the solvent in the exhaust gas generated
during the coating process, and achieves the effects
of dust removal and exhaust gas purification.
2. Key Features
● The two-stage water treatment has a good effect on
NMP recovery.
● The principle of water bath is to recycle NMP waste
gas in coating process.
● The stainless steel liner exhibits superior corrosion
resistance, ensuring durability and reliability in
working process.
● It is perfectly compatible with our roll to roll transfer
coating machine.
3. Technical Parameters
Model
Voltage
Power
Processing capacity
Inlet temperature
Water storage volume
Recovery object
Gas emission
Dimension
Weightt
STC-NMP-A2
AC380V±10%, 50Hz
1.5KW
600m3 /h
≤150℃
65L×2
Water-soluble solvent gas
External Pipeline
L900 * W700 * H1850mm
300kg
One-stop Solution Provider for Battery Research
50L Compact Vacuum Drying Chamber
1. Introduction
This laboratory vacuum drying oven is suitable for drying,
sterilizing, and thermal processing of materials under
vacuum environments. Equipped with an adjustable
temperature control system, it can reach up to 200°C with
stable and accurate performance.
2. Key Features
● Transparent door allows observation of dry items inside
the vacuum chamber.
● The chamber is rectangular to achieve maximum
effective volume.
● Double toughened explosion-proof glass door ensures
security.
● Heating temperature is settable, providing users with
the flexibility to set the desired temperatures according
to their technology.
3. Technical Parameters
STC-KZK-502
AC220V±10%, 50Hz
50L other volume can be optional
2pcs
RT+10~200℃ is standard, RT+10~250℃ can be customized
133Pa
External connecting
L710 * W560 * H550mm
55kg
18
Model
Voltage
Volume
Tray
Temperature
Vacuum degree
Vacuum pump
Dimension
Weight
Lab Three Door Vacuum Oven
1. Introduction
This vacuum oven is constructed with a stainless steel
inner chamber, ensuring corrosion resistance and long
service life. Independent working chambers allow
separate operation for improved flexibility. The system
supports automatic cycling of heating, vacuuming, and
inert gas filling.
2. Key Features
● Over-temperature protection device, to ensure the
safety of materials.
● The device is equipped with universal movable
casters for moving easily.
● Elastic double glass door with overpressure protection.
● Equipped with a PLC and touch screen control interface,
it offers high automation and precise parameter
management.
3. Technical Parameters
Model
Voltage
Oven temperature
Inner chamber temp error
Inner chamber dimension
Vacuum holding time
Vacuum degree
Dimension
Weight
STC-KZK-3D
AC380V±10%, 50Hz
RT~250℃ adjustable
±4℃ (No load in vacuum state) (Oven chamber is 220℃)
W660 * D900 * H330mm
≥98% after 24 hours at -0.98KPa
-0.98KPa
W1500 * D1400 * H1850mm
960kg
19
One-stop Solution Provider for Battery Research
4 Doors Circular Vacuum Drying Oven
1. Introduction
The four-door circular vacuum drying oven is designed
with a high-quality stainless steel inner chamber,
ensuring excellent corrosion resistance and long service
life. It features an independent relay control system
combined with a precise temperature control unit,
providing stable and accurate heating performance.
2. Key Features
● It adopts 304 stainless steel heating tube coiled liner
heating type, and the temp is controlled evenly.
● It is sealed with silicone rubber sealing strip, the door is
made of 15mm thick tempered glass.
● The screen system adopts the centralized operation of
the touch screen, which is convenient to operate and
reliable to control.
● Elastic double-layer glass door with over-pressure
protection.
3. Technical Parameters
20
Model
Voltage
Temperature
Inner chamber temp error
Drying method
Vacuum degree
Dimension
Weight
STC-KZK-4D
AC380V±10%, 50Hz
RT~150℃
±3℃ (No load in vacuum state)
The heating tube surrounds the inner tank for heating
-0.1MPa
L2050 * W1240 * H2010mm
1000kg
Manual Vertical Roll Press Machine
1. Introduction
The manual rolling press machine is designed for
electrode calendering after coating and drying in battery
manufacturing processes. It is a bench-top unit with
manual operation, offering a compact structure and easy
handling. The machine is equipped with a 100 mm width
roller as standard, while other roller widths are available
upon request.
2. Key Features
● Pressing thickness is adjustable with digital dial
indicator displayed.
● The rollers are treated with hard chrome plating for
excellent rust resistance and easy maintenance.
● The compact size of the equipment enables it for use
in a glove box.
● Manual operate, saving power consumption.
3. Technical Parameters
STC-DSL-100
φ96 * W100mm is standard,
100, 150, 200, 250mm width is available
0~3mm adjustable
>HRC62
0~40mm/s
L360 * W200 * H350mm
45kg
21 Model
Roller size
Pressing thickness
Roller hardness
Feeding speed
Dimension
Weight
One-stop Solution Provider for Battery Research
Electric Battery Electrode Rolling Calender
1. Introduction
This electric rolling press machine is designed for
calendering batter y material s in laborator y
environments. The machine is especially effective
for reducing electrode thickness and increasing
material density, thereby improving overall electrode
performance
2. Key Features
● Equipped with feeding and discharge guide plates,
ensuring smooth material handling and improving the
efficiency of the rolling process.
● Vertical rollers are designed for convenient feeding
and pressing.
● Electric roller press mode generate a consistent
pressing force, so the rolled material is more uniform.
● Pressing thickness can be adjusted.
3. Technical Parameters
22
Model
Voltage
Power
Roller size
Roller hardness
Pressing thickness
Feeding speed
Dimension
Weight
STC-DDG-100
AC220V±10%, 50Hz
120W
φ 96 * W100mm is standard,
100, 150, 200, 250mm width is available
>HRC62
0~3mm adjustable
0~40mm/s adjustable
L520 * W220 * H350mm
55kg
Heating Rolling Presser for Battery Fabrication
1. Introduction
This heated rolling press machine is specifically designed
for calendering battery materials under controlled
temperature conditions.The rollers are equipped with
built-in heating tubes, enabling precise and uniform
temperature distribution across the roller surface,
resulting in enhanced material performance.
2. Key Features
● Adopting the design of heating tube built-in roller makes
the heating effect more evenly.
● Heating temperature is adjustable and can be controlled
by thermostat.
● Digital displayed speed controller, easy to control and
adjust the pressing speed.
● The rollers are equipped with the protective cover to
protect the user’s hands from being pinched.
3. Technical Parameters
STC-DRG-100
AC220V±10%, 50Hz
φ96 * W100mm is standard,
100, 150, 200, 250mm width is available
0~3mm adjustable
RT~130℃ adjustable, digital display
0~40mm/s, digital display
L670 * W220 * H330mm
50kg
23 Model
Voltage
Roller size
Pressing thickness
Heating temperature
Feeding speed
Dimension
Weight
One-stop Solution Provider for Battery Research
Heated Calendar Machine for Dry Electrode
1. Introduction
This equipment is primarily designed for the electric
rolling of battery materials and other non-ferrous
materials at controlled heated temperatures. The
dual servo control system ensures high precision
and allows for asynchronous rotation of the rollers.
2. Key Features
● Dual servo control system with high precision and
asynchronous rotation capability.
● Equipped with a feeding hopper for convenient powder
material loading. The feeding hopper width is adjustable.
● PLC touch screen control for automation and high-
precision digital adjustment.
● High roll press precision, with roller cylindricity ≤ ±2μm.
3. Technical Parameters
24
Model
Voltage
Feeding speed
Roller size
Roll press thickness
Calendering temperature
Dimension
Weight
STC-DRG-150HGF
AC220V±10%, 50Hz
0~40 mm/s
φ96 mm * W150 mm
0~2 mm, gap is adjustable, digital display
RT~130℃ adjustable
80kg
Working box: L720 * W450 * H420 mm
Control box: L450 * W400 * H380 mm
Heat Hydraulic Calender with Winder/Unwinder
1. Introduction
This heated hydraulic calender machine is used for
high-precision rolling of battery cathode and anode
electrodes, making it ideal for applications that require
high pressing force and consistent roll gap control.
2. Key Features
● Equipped with winding and unwinding mechanism for
continuous roll pressing of roll substrates.
● Upper and lower rollers have built-in heating tubes,
temperature controlled by thermostat and displayed
digitally.
● The rollers are treated multiple treatments to ensure
high internal and external hardness and excellent
abrasion resistance.
● PLC and HMI operation, convenient to set each
parameter.
3. Technical Parameters
Model
Voltage
Roll pressing speed
Roller size
Substrate width
Roll pressing gap
Roll press temp
Install space dimension
Total weight
STC-DYG-400RS
AC220V±10%, 50Hz
0.3 ~ 4m/min
φ200mm*W400mm
Max 350mm
0~3mm adjustable,
RT~130℃ adjustable, digital display
L1950 * W1630 * H1170mm (include the equipment and
winder & unwinder)
1000kg
25
The device is a multifunctional combination that can
perform film formation and film lamination.
Equipped with winding and unwinding correction
device to realize continuously production,the steel
conveyor belt to assist the stable material feeding.
Equipped with a cutting mechanism to cut the
material edge smoothly after film lamination.
Small size,easy to operate,flexible and fast to use..
One-stop Solution Provider for Battery Research
Dry Electrode Roll Press Film Lamination Device
1. Introduction
This equipment is designed for precision rolling of nonferrous materials such as dry electrode compositions
under certain temperature conditions. It features a
variable steering speed ratio servo-driven system and
adjustable rolling thickness, integrated with automated
winding and unwinding mechanisms for continuous
production.
2. Key Features
3. Technical Parameters
26
Model
Voltage
Roller size
Substrate width
Pressing thickness
Pressing temp
Dimension
Weight
STC-DFM-200SG
AC220V±10%, 50Hz
Φ96mm * W200mm
0~190mm
0~2mm adjustable, digital display
RT~130℃ adjustable, digital display
L1100 * W770 * H1300mm
350kg
●
●
●
●
Manual Coin Cell Electrode Disc Cutter
1. Introduction
This manual punching machine is specifically engineered
for the cutting various metal and foil with the thickness of
0.005~0.5mm. Especially cutting coin cell components
like electrode and separator sheet. Standard cutting die
φ5~24 mm can be optional.
2. Key Features
● Different size of cutting die can be optional from
φ5~24mm diameter.
● The disc is cut with high precision and without burrs
and dents.
● The machine body is made of anti-corrosion material
for durable.
● Small size, it can operate inside the glove box.
3. Technical Parameters
STC-ASC-24
φ5~24mm optional
0.005~0.5mm
≥25mm
Manual
L150 * W170 * H235mm
6kg
27 Model
Cutting die size
Cutting material thickness
Punching stroke
Operation
Dimension
Weight
One-stop Solution Provider for Battery Research
Coin Cell Electric Electrode Punching Machine
1. Introduction
This electric punching machine is designed for automatic
punching of battery electrodes. It is equipped with
interchangeable dies in various sizes, allowing it to
process thicker materials for precise hole punching.
2. Key Features
3. Technical Parameters
28
Model
Cutting die size
Punching pressure
Punching stroke
Punching thickness
Dimension
Weight
STC-ADC-24
φ5~24mm optional
≥600kg
≥25mm
Within 0.3mm
L300 * W300 * H500mm
50kg
● High cutting accuracy, sufficient punching pressure,
no burrs and dents.
● Visual protective cover, safer operation.
● The max punching thickness can reach 0.3mm.
● Exquisite appearance, small dimension, easy to clean.
29 Hydraulic Crimping Machine for Button Cell
1. Introduction
This manual coin cell crimping machine is developed
for crimping various types of coin cell cases, including
models such as CR2032, CR2450, etc. It is equipped
with a CR20XX series crimping die as standard, while
other die sizes are available upon request to meet
different application requirements. A coin cell
disassembly die can also be available.
2. Key Features
● Specially designed hydraulic structure for labor-
saving operation.
● It’s designed with crimping height limitation to avoid
damage.
● Embedded pressure gauge designed to observe and
accurately monitor crimping pressure.
● Small volume so that it can operate inside the glove
box.
3. Technical Parameters
Model
Standard crimping die
Die material
Operation mode
Hand rocker force
Dimension
Weight
STC-ASF-20
CR20XX crimping die is standard, others crimping die is optional
Tungsten steel
Manual
<6kg
L232 * W190 * H330mm
25kg
One-stop Solution Provider for Battery Research
Coin Cell Electric Crimper for Battery Research
1. Introduction
This electric coin cell crimping machine is designed for
crimping various types of coin cell cases, such as CR2032,
CR2450, etc. The electric crimping system not only
reduces manual labor but also ensures precise and stable
pressure control, significantly improving crimping
consistency and reliability.
2. Key Features
● Electric drive method for energy-saving operation.
● Compact size, easy to use inside glovebox.
● Dual start buttons, it runs when pressed the two start
buttons at same time.
● Crimping pressure can be adjustable and digital display.
3. Technical Parameters
STC-ADF-20
AC220V±10%, 50Hz
Electric
CR20XX series is standard, others crimping die size is
optional
Tungsten steel
Max 1000kg adjustable, digital display
L270 * W185 * H570mm
30kg
30
Model
Voltage
Operation mode
Crimping die
Die material
Crimping pressure
Dimension
Weight
31 Lab Pneumatic Button Cell Crimping Machine
1. Introduction
This machine is a compact gas-driven (pneumatic)
coin cell crimping machine designed for sealing various
types of coin cell cases, such as CR2032, CR2450, etc.
The crimping die is manufactured from tungsten steel,
offering excellent corrosion resistance and extended
service life, ensuring stable performance and longterm durability.
2. Key Features
● Crimping die is made of tungsten steel, boasts
enhanced corrosion resistance and extended service
time.
● Coin cell disassembling die can be optional, easy to
replace.
● Perfect to be used inside glovebox, no leakage.
● Pure pneumatic operation, no electricity needed,
easy to use.
3. Technical Parameters
Model
Standard die
Die material
Driven mode
Air source
Air consumption
Dimension
Weight
STC-AQF-20
CR20XX crimping die is standard,
others crimping die is optional
Tungsten steel
Gas driven
Argon, nitrogen, or compressed air, it is not recommended to
use compressed air when crimper used inside glovebox
480ml each crimping
L220 * W220 * H420mm
28kg
One-stop Solution Provider for Battery Research
Lab Roll to Sheet Battery Electrode Cutter
3. Technical Parameters
STC-BHQ-300
AC220V±10%, 50Hz
10~300mm
1~9999mm
±0.3mm
5~250mm/s
≤12μm
0.5~0.8MPa
L1500 * W700 * H1000mm
240kg
32
Model
Voltage
Electrode width
Cutting length
Cutting accuracy
Fixed length cutting speed
Burr
Compressed air
Dimension
Weight
1. Introduction
This machine is designed for cutting roll-type battery
anode and cathode electrodes into single sheets. The
cutting length, quantity, and speed can be freely set
according to production requirements.
2. Key Features
● Cutting length, quantity and speed can be freely set.
● Automatic tension adjustment for unwinding.
● Continuous cut with 2 modes: fixed length and optical
fiber tracking.
● PLC touch screen control, convenient to operate.
33 Semi-auto Electrode Die Cutting Machine
1. Introduction
This die cutting machine is designed for precision
cutting of electrodes into specified shapes for cathode
and anode applications with current collector tabs. It
features a dual-hand start control system to ensure safe
operation and effectively prevent accidental injuries.
2. Key Features
● Different size of cutting die can be customized and
easy to replace.
● 2 start buttons, the die can only be activated while
both buttons are pressed simultaneously for safety.
● The device is configured with a counter, enabling the
operator to conveniently identify the cutting numbers.
● Fitted with a laser positioning mechanism.
3. Technical Parameters
Model
Voltage
Material feeding
Cutting die size
Cutting accuracy
Pressurized cylinder
Air pressure
Capacity
Dimension
Weight
STC-BMQ-SM280
AC220V±10%, 50Hz
Manual
Max L280 * W180mm is standard, other sizes can
be customized
±0.1mm
3T
0.5~0.7Mpa
800~2000 pcs/h
L580 * W455 * H900mm
146kg
One-stop Solution Provider for Battery Research
34
Pneumatic Die Cutter for Pouch Cell Electrode
1. Introduction
This equipment is designed for precision cutting of specific
shape battery anode and cathode electrodes. With its
excellent cutting accuracy and reliable performance, it
serves as an essential tool for pouch cell research and
battery material development.
2. Key Features
● Air cylinder drive, no electricity required, punching force
and punching speed adjustable.
● Long lifetime for the cutting die, >30000 times.
● Different size of cutting die can be customized and easy
to replace.
● 2 start buttons, the die can only be activated while both
buttons are pressed simultaneously for safety.
3. Technical Parameters
STC-BMQ-G120
Gas driven
Manual
Max L120 * W80mm is standard,
other sizes can be customized
±0.1mm
≤20μm
≤12μm
L350 * W230* H300mm
32kg
Model
Driven mode
Material feeding
Cutting die size
Cutting accuracy
Horizontal burr
Vertical burr
Dimension
Weight
Auto Precision Battery Electrode Die Cutter
1. Introduction
This equipment is designed for the automatic die cutting
process of lithium battery cathode and anode electrodes.
It is optional with the function of automatic feeding and
discharging of electrodes.
2. Key Features
● Feeding device: Adopts the structure of inflatable
shaft, the inflatable shaft with positioning scale.
● Electrode limiting component: Adopt guide plate
limiting guide wheel to limit ensure that the electrode
is not shifted during feeding.
● Driving component: Adopting stepping motor to
control traction automatically, any electrode length
can be set for traction.
● Protective device: Installation of aluminum profile
frame with Plexiglas plate protective cover.
3. Technical Parameters
35 Model
Voltage
Max processing area
Max feeding width
Burrs
Punch cutter life
Dimension
Weight
STC-BMQ-A280
AC220V±10%, 50Hz
280 (including tab) * 180mm, other size can be customized
300mm
Vertical burr ≤15μm, horizontal burr ≤20μm
10-50 thousand times
L1650 * W1000 * H1800mm
700kg
One-stop Solution Provider for Battery Research
36
Pouch Cell Electrode Z-fold Stacking Machine
1. Introduction
This equipment is designed for the pouch cell stacking
process, enabling precise “Z-shaped” stacking of
cathodes, anodes, and separators to form a complete
pouch cell core. The machine features an integrated
design, combining the electrical cabinet and the working
unit into a single structure, which significantly reduces
the overall footprint.
2. Key Features
● Compared with previous generation product, this
machine integrates the control unit and operation unit
together, easy to operate.
● Smaller size than last generation, saving space.
● Large range of applicable cell stack sizes.
● High working efficiency and with digital display counter.
3. Technical Parameters
STC-BDP-MA200
AC220V±10%, 50Hz
200W
L (20~200) * W (20~200) mm
Max 18mm
Max φ200mm
300mm
0.4~0.7MPa
L650 * W400 * H700mm
30kg
Model
Voltage
Power
Stacking size
Stacking thickness
Separator roll diameter
Roller moving stroke
Air source
Dimension
Weight
Manual Battery Electrode Stacker
1. Introduction
This equipment is designed for the electrode stacking
process of lithium-ion batteries, enabling precise
“Z-shaped” arrangement of cathode and anode
electrodes together with the separator to form a pouch
cell core. Featuring high stacking efficiency and
excellent stacking consistency, making it an ideal
solution for R&D sample preparation and small-scale
pilot production.
2. Key Features
● Simple tension control is adopted.
● Wide range of applicable stacked cell sizes.
● The foot switch is applied to control the cylinder action.
● The machine is easy to operate and maintain.
3. Technical Parameters
37 Model
Voltage
Stacking size
Stacking thickness
Separator roll diameter
Stacking accuracy
Air pressure
Dimension
Weight
STC-BDP-MB200
AC220V±10%, 50Hz
Min L44*W44mm, Max L200*W150mm, tab size is covered,
customized size is available
Max 12mm
Max φ220mm
±0.5mm
0.4~0.6MPa
L512 * W820 * H580mm
50 kg
One-stop Solution Provider for Battery Research
38
Semi-auto Pouch Cell Stacking Machine
1. Introduction
This equipment is mainly used for Z-shaped stacking of
anode electrode, cathode electrode, and separator to
assemble pouch cell cores. The electrodes are automatic
picking up and stacking are carried out automatically,
ensuring high stacking efficiency and precision.
2. Key Features
● Manual loading the electrode, automatic position,
mechanical arm picks up electrode, automatically stacking.
● Stacking quantity can be pre-set.
● Stacking size is adjustable, maximum stacking size
200 * 150mm.
● Separator correction ensures high stacking accuracy.
3. Technical Parameters
STC-BDP-SMC200
AC220V±10%, 50Hz
Max 30mm
Max 500 layers
Max φ250mm
±0.4mm
0.5~0.8MPa
L950 * W750 * H1050mm
285kg
Model
Voltage
Stacking size
Stacking thickness
Stacking layers
Separator roll diameter
Stacking accuracy
Air source
Dimension
Weight
Min L40mm*W40mm, Max L190*W190mm,
customized size is available
39 Compact Semi-auto Stacking Machine
1. Introduction
This product is mainly used for Z-shaped stacking
anode, cathode electrode and separator to make
battery core. Stacking different size battery cores
can be realized by adjusting the clamps, which is
very suitable for research and sample production
of stacked lithium-ion battery.
2. Key Features
● Can be used in the glove box.
● Roll material separator automatic servo constant
tension control,Z-shaped automatic stacking.
● The number of stacking electrode can be automatically
controlled according to pre-setting.
● Left and right movement is controlled by pulse motor,
precise and convenient when fine-tuning.
3. Technical Parameters
Model
Voltage
Electrode width
Electrode length
Tab length
Stacking thickness
Dimension
Weight
STC-BDP-SMD100
AC220V±10%, 50Hz
40-90mm
40-100mm (tab direction, not include tab size)
Max 15mm
Max 15mm, maximum number of stacked
layers can be set to 100
L800 * W600 * H720mm
120kg
One-stop Solution Provider for Battery Research
Automatic Pouch Cell Z-shape Stacking Machine
1. Introduction
This product is used for Z-shape stacking of anode,
cathode electrode and separator of pouch cell core.
Fully automatic operation, high stacking efficiency
and precision.
2. Key Features
● Automatic servo constant tension control of rolled
separator, automatic separator correction control.
● The number of stacking layers can be auto controlled
according to preset setting.
● Adopt the compatibility design, cell size changes
can be realized by adjusting the positioning clamp,
wide range of adjustment.
● Separate design clamp of anode and cathode electrode
to avoid mixing of anode and cathode materials.
3. Technical Parameters
40
Model
Voltage
Stacking size
Stacking thickness
Stacking accuracy
Separator roll diameter
Air source
Dimension
Weight
STC-BDP-E150
AC220V±10%, 50Hz
Min. L40mm * W40mm Max. L150mm * W150mm
Max. 30mm
Neatness≤±0.3mm
Max. 250mm
0.5 ~ 0.8MPa
L1650 * W1050 * H1800mm
600kg
41 Pouch Cell Tab Trimming and Shaping Machine
1. Introduction
This tab trimming and shaping machine is designed
to perform both tab trimming prior to welding and
tab shaping post-welding, with insulated cutting
blades and pressure blocks to prevent electrostatic
discharge from penetrating the separator and
causing short circuits.
2. Key Features
● The cutting and pressing stroke, speed, and
pressure are adjustable to accommodate
different thickness samples.
● Upper and lower precision die are made of
high-strength tool steel to ensure optimal
cutting and shaping effect.
● Manual loading and unloading of fixtures for
easy positioning and use.
● Small size is suitable for benchtop operation.
3. Technical Parameters
Model
Voltage
Cutting blade length
Pressing die size
Applicable cell core size
Pressing pressure
Trimming pressure
Compressed air
Dimension
Weight
STC-BQX-SM110
AC220V±10%, 50Hz
110mm
L105 * W25mm
L200 * W200mm
Max. 10000N
Max. 10000N
0.5 ~ 0.8MPa
L740 * W500 * H710mm
120kg
One-stop Solution Provider for Battery Research
Ultrasonic Metal Spot Welding Machine
1. Introduction
This spot welder is designed to weld battery electrodes
and tabs. It has the advantages of strong welding spot,
low internal resistance of the welding spot, and good
appearance without oxidation traces.
2. Key Features
The conductibility after welding is good and the
resistivity is low.
Short welding time, fusion can be completed within
0.01~2 seconds.
The welding head is made of wear-resistant material
with good durability.
The fusion can be completed without solder and
soldering paste, quite economic and convenient.
3. Technical Parameters
42
Model
Voltage
Generator frequency
Welding time
Welding pressure
Welding layers
Welding size
Dimension
Weight
STC-BCH-1000
AC220V±10%, 50Hz
40KHz
0.01~2s
0.5~0.7MPa
20 layers for reference, depending on different materials
L4 * W4mm, customized size is available
Electric part: L520 * W410 * H180mm
Working part: L400 * W240 * H325mm
60kg
Hot Flat Pressing Machine with Resistance Tester
1. Introduction
This hot flat pressing machine with resistance tester is
suitable for hot flat pressing of cell after winding,
facilitating subsequent case assembly. It operates on
the principle of high-voltage impact to perform microshort circuit testing on the electrode plates of pouch cell.
2. Key Features
● Conducts micro-short circuit test while enabling hot-
pressing and shaping of cells to achieve a smooth and
uniform appearance.
● Offers optional manual and automatic testing modes.
● Enables micro-short circuit testing under controlled
heating and pressurization conditions.
● Incorporates a light curtain protection device to ensure
safe operation.
3. Technical Parameters
STC-BRY-200R
AC220V±10%, 50Hz
1.5KW
Max 50μA
Max 199MΩ
Max. 900±5Kg
L200 * W200mm
Max. 120℃±5℃
L450 * W450 * H800mm
120kg
43 Model
Voltage
Heating power
Measurable leakage current
Measurable resistance
Testing pressure
Pressing die size
Heating temperature
Dimension
Weight
