无码日本精品蜜桃_九一精品无码一区_亚瑟中文字幕欧美_AV丝袜一区二区_AV丝袜一区二区_中文无码有码88_手机在线播放av_青青日中文字幕

CONTENTS

目錄

公司介紹 Company profile 5
車間風采Workshop 9
發展歷程History 11
合作伙伴 Customers 13
榮譽資質 Certificates and Patents 15

振動試驗機系列

VIBRATIONTESTSYSTEMS

原理與選型 Principle and model selection 19
風冷振動試驗機Air Cooled Vibration TestSystem 21
水冷振動試驗機 Water Cooled Vibration Test System 27
綜合環境試驗系統 Vibration Combined Environmental Test System 37
數字控制器 Digital Vibration Controller 41
標準振動試驗機Standard Vibration Test Systems 44

跌落試驗機系列

沖擊試驗機系列

SHOCKTESTSYSTEMS

沖擊試驗機 Shock Test System 47
高加速度沖擊試驗機 High Acceleration Shock Test Systems 51
斜面沖擊試驗機 Incline Impact Test Systems 55
碰撞試驗機 Bump Test Systems 57
沖擊/跌落測量系統 Shock/Drop Measurement Systems 59

DROPTESTER

零高度跌落試驗機Drop Tester for Heavy Package 60
包裝跌落試驗機Drop TestMachine 61
便攜式產品跌落試驗機Drop Test Machine for Portable Gadgets 63
釋放抓鉤 Release Hooks 64
產品應用Applications 65
展會與研討會 Exhibitions and Seminars 69
公司活動 Company Activity 70

VIBRATIONTEST

SYSTEMSERIES

振動試驗機系列

02

工作原理與選型風冷振動試驗機

VV VV VV VV vV

水冷振動試驗機綜合環境試驗系統標準振動試驗機 Standard Vibration TestSystems

Principle and model selection

工作原理與選型

THEWORKINGPRINCIPLEOFVIBRATIONEXCITER

激振器工作原理

CALCULATETHEREQUIRED EXCITATIONFORCE

F=(M0+M1+M2)×A×1.3

計算所需的激振力

Sine Force正弦推力(p-p)1.3:SafetyFactor(安全系數)
FExcitingForce激振力(kgf)RandomForce隨機推力(Rms)
M0Armaturemass動圈重量（kg)=sine Force/√2
M1AuxiliaytableorFixture平臺或夾具重量（kg)ShocForce沖擊推力
M2Specimen待測物件重量(kg)=SineForce\*2正弦推力\*2
A加速度g注：當采用重力單位時，加速度單位為g，激振單位為kgf，其中1g=9.8m/s2；
Whenusinggravityasunit,theaccelerationunitisg，excitingforceunitiskgf,1g=9.8m/s2；

TESTREQUIREMENTSANDMODELSELECTIONGUIDE試驗條件與基本系統選型指導

要選擇一個適當?shù)恼駝?dòng)試驗系統，最重要的是知道履行一個振動試驗需要的激振力，評估計算激振力需要了解以下的試驗規格：

Tochooseasuitablevibrationtestsystem,themostimportantthingistoknowtheexcitingforcerequiredtoperformthe vibration test.Toevaluateandcalculatetheexciting force,thefollowing testspecificationsshouldbeknown:

\bullet 清晰的試驗條件ClearTesting Requirements \bullet 頻率(頻率范圍) Frequency (Frequency Range) \bullet 最大的加速度MaximumAcceleration

\bullet 最大的位移MaximumDisplacement0 最大的速度Maximum Velocity0 試件和治具 SpecimenMassandFixation

需要根據試驗頻率的 上限和尺寸來選擇一 個夾具（垂直擴展平 臺）或水平滑臺，需要 用其質量來評估振動 試驗所需要激振力。

Thespecimen fixture isselected based on the upper limitof test frequency and specimen size, either vertical expansion platform or horizontal sliptable.Specimenmassis neededtoevaluatetherequired exciting forcefor vibration test.

評估動圈的質量(EVALUATIONOFARMATUREMASS)

評估振動試驗需要的激振力時，您可以選擇一個臨時的動圈質量（根據EV系列的型號）。

Whenevaluating theexciting forceneededforvibration test,youcanchoosea temporaryarmature mass (according to the model of EV series)

VIBRATIONTESTMACHINESELECTIONGUIDE 振動試驗機選型指導

AIRCOOLEDVIBRATIONTESTSYSTEM風冷振動試驗機

EV系列電磁式振動試驗機在實驗室條件下模擬機械振動環境測試各種振動試驗應用領域中的沖擊強度和可靠性。在實驗室借助振動試驗機系統可以模擬再現正弦、隨機、諧振搜尋與駐留、典型沖擊和道路仿真等環境。對于產品的質量保證、新品研發都是必不可少的。

EV系列電磁式振動試驗機經特殊設計滿足長時間工作，加裝耐振底座可實現垂直和水平方向振動。標準的臺體安裝了高效氣囊隔振震裝置，使振動傳遞到建筑物的振動降到最低，同時在大多數情況下不需要額外地基，

振動臺、功率放大器和振動測控制系統組成了一套完整的振動試驗系統，依照相關的國家和國際標準。如：MIL-STD、DIN、SO、ASTM、IEC、ISTA、GB、GJB、JIS、BS等為用戶建立產品質量檢驗提供技術保障。

EVseriesof electromagnetic vibration testing systemsimulate the vibration environment under the laboratory condition, and test the impact strength aswell as reliability of various vibration testapplications.In the laboratory,with theaid of vibration testing system,simulations of reproduction of sinusoidal, random,resonant search and dwell,classical shock and road models,etc.can be achieved.It isessential for product quality assurance, new product research and development

EVseries of electromagnelic vibration testing system is specially designed to meet the need for long time operation. Vertical and horizontal vibrations can be achieved by the installationofvibration resistantbase.The st:andard platform isequipped with high efficiencyairbag shock isolationdevice, so that the vibration transmitted to the building can be minimized.There is no need for additional foundation in most of the cases.

A complete set of vibration testing system is composed of shaker,power amplifier and vibration measuring control system,in accordance with the relevant national and international standards (such as: MIL-STD,DIN,ISO,ASTM, IEC, ISA, GB, GJB,JIS,BS,etc.) to provide technical support for establishing product quality inspection

THEPRINCIPLESOFOPERATION振動試驗機工作原理

堅強之懸掛系統與直線運動導向，承載能力強，導向性能好，穩定度高。

高效率DClass功率轉換，3-Sigma峰值電流，提供最優化的功率消耗和最小的諧波失真。

HighefficiencyDclass powerswitching, 3-sigma peak current,harmonicdistortion.

06
快速自檢診斷及連鎖保 護，安全可靠度高。
Quick self-diagnosiswith safety interlock, highsafety reliability. 05
提供水平及垂直擴展平 臺之不同運用
Horizontal and vertical expansionplatforms for different applications.

Airbag shock isolation device for vibration platform without the need of additional foundation,perfect reproduction of vibrational wave and reduction in vibration transmittance.

控制器的選用搭配提供最簡易操控。

AIRCOOLED SHAKERSYSTEM風冷振動系統

可選項Options:

水平滑臺 SlipTable 33-34
垂直擴展臺 Head Expanders .35
輔助裝置 Auxiliary device.. 36
振動控制器 Vibration controller ·41-43

INSTALLATIONREFERENCEDRAWING安裝參考圖

冷卻風機建議放置室外電源要求：三相五線AC380V，配置空氣開關（大小以實際選擇的設備大小決定）

氣源要求：0.6-0.8MPa

注意：獨立接地，接地電阻少于4Ω，如果電源電壓變動較大>380V/±%10，請自行配備穩壓器

The air blower is recommended to be placed outdoors

Powersupply requirements:three-phase, five-wire,AC380V,50/60Hz,airswitch (the size is determined by the actual device model)

Air Supply requirements: 0.6-0.8 Mpa

Note:independent grourding,connection resistance is less than 4Ω,if the power supplyvoltagechange is larger than 3 8 0 \mathsf { V } > ± 1 0 % . please provide your own voltage regulator

DIAGRAMDRAWINGOFCOOLINGBLOWERPLACEMENT風機放置參考圖

振動試驗過程中，會產生噪音。振動試驗的噪音可分為加振噪音、散熱風道噪音、冷卻風機排出噪音、功率放大器的風扇噪音。

Duringthevibration test,noisewillbegenerated.Thenoiseofthevibrationtestcanbedividedintothevibrationnoise, theairintakenoiseofthevibrationgenerator,thecoolingfan,thecoolingfandischarge noise,andthefannoiseof the power amplifier.

OUTDOORSCHEMATICDIAGRAMOFFANPLACEMENT風機放置室外參考圖

NOISEREDUCTIONMETHODS減少噪音方式

WATERCOOLEDVIBRATIONTESTSYSTEM水冷振動試驗機

WATER-COOLEDSHAKERSYSTEM水冷振動系統

可選項Options:

水平滑臺 SlipTable 33-34
垂直擴展臺 Head Expanders ..-35
輔助裝置 Auxiliary device. 36
振動控制器 Vibrationcontroller 41-43

AirCooledShakerSiZE

風冷振動臺體尺寸

HORIZONTALSLIDING TABLE(HST)水平滑臺

水平滑臺可以與各種規格的振動臺配合，實現水平方向測試。

倒臺系統采用渦輪轉動系統，個人能單獨輕松地轉動振動臺臺體與水平滑臺連接。利用機械限位裝置可以確保水平滑臺與振動臺的連接水平滑臺主要由水平模塊、連接頭、水平滑臺基座、油源組成.

HG系列水平滑臺適用于常規的負載試件。

HB系列水平滑臺具有較高的傾覆力矩和橫向限制，適用于測試重心較高、重量較大的負載試件；
HT系列水平滑臺主要適用于大尺寸試驗件的水平振動試驗，可以提供比HB系列更大的承載力和抗傾覆力矩。 TheHorizontalSlideTable(HST)canbematchedwithvariousspecificationsoftheshakertoachievehorizontaldirectiontest. Theshakerusesaelectricrotationsystem,andindividualscaneasilyrotate thevibrationexciterandconnecttheslidingplate The mechanicalimit devicecan ensure the connection between the vibration exciterand the sliding plate.
TheHSTis mainlycomposedofahorizontalmodule,aconnecting head,aHSTbaseandamedium/high pressureoilsource. HG series HST is suitable for conventional load specimens.
HBseriesHSThas highoverturning momentandlaterallimit,whichissuitablefortestingloadspecimenswithhighcenterof gravity and large weight.
HTseries HSTis mainly suitableforhorizontal vibration testof large size testpieces,which canprovide greaterbearing capacity and anti-overturning moment than HB series.

油膜滑臺是利用一塊精確研磨表面的天然花崗巖和一個鎂合金材料的滑臺在油膜之間活動組成 Oilfilm slip table is composed of a precisely ground natural granite and magnesium alloy

命名信息 舉例：HG100M

材料代碼M:鎂MagnesiumA:鋁Aluminium (Al)
尺寸代碼：常規方型 長X寬 例如：100100cmX100cm非常規長條形軸向X寬例如：1512150cmX120cm
導向機構代碼：G--常規導向滑軌-T型GuidesliderailB--B型高壓軸承B-type High-pressure bearingT--T型中壓軸承T-type Medium pressure bearing
產品類型代碼：H-水平滑臺Horizontalslidingtable

HEAD EXPANDERS(HE)垂直擴展平臺 (組件)

VT系列擴展臺面為垂直方向測試提供比動圈更大的安裝臺面。擴展臺面由質量較輕的鎂合金或鋁合金材料制作而成，具有較高的強度重量比。

配有載荷支撐導向的擴展臺面可以可靠的安裝和測試大尺寸的試件，降低損壞振動機懸掛系統的風險。帶導向擴展臺面可以用于模擬在惡劣的運輸條件下，對大而重的設備進行測試，還可以利用增加了額外限制條件和負載的、測試條件較為苛刻的設備進行測試。

夾具工裝一般是按照測試樣品的安裝要求去度身定制。常規的有立方型、L型和T型夾具工裝都可以用于對多個小規格試件的測試。立方型、L型和T型的夾具工裝也是三軸向的測試的首選，通過改變?cè)嚰姆较蚨恍枰黾铀交_(tái)。

The VTSeries HEprovidesalargermounting table thanthearmatureforverticaltest.The HEis madeoflighterweight magnesium oraluminum alloy material and has a high strength-to-weight ratio. HE with load support guides enablereliableinstalationand testingoflarge specimens,reducing theriskofdamage to the vibratorsuspension system.Guided HEcan beused to simulate the testing of largeand heavyequipmentunder harshtransportationconditions,swellastestingofmoredemanding equipmentwithadditionalconstraintsand loads. Fixture is generally customized according toteinstalationrequirements ofthe testsample.Conventionalcubed, L-shaped andT-shapedfixturescan be usedtotestmultiplesmalsize specimens.Cubed,LandTfixtures arealso preferredfortriaxialtesting bychangingtheorientationofthespecimenwithouttheneedtoaddaHorizontalSlideTable.

AUXILIARYDEVICE輔助裝置 (組件)

空氣彈簧支撐 Air spring support

FIXTURE夾具 (組件)

輔助導向裝置Auxiliary guide

本公司可以依據客戶實際使用需求提供立方體，L型和T型等多種夾具和特殊的附屬裝置供客戶使用。

According to customers actual demand, we can offer different shapes of fixture, such as three-dimenesional square,Land T shape.

VIBRATIONCOMBINED

ENVIRONMENTALTESTSYSTEM

綜合環境試驗機

綜合環境試驗系統主要是試驗箱和振動試驗系統的綜合，試驗時將溫度、濕度、振動（高溫或低溫），（正弦振動或隨機振動）以及電應力按規定的周期綜合在同一氣候試驗箱中施加到樣品上進行溫度、濕度、振動的“環境仿真”試驗。與單一環境因素相比，更真實地模擬產品在運輸與實際使用環境。是考核、評定產品對環境變化的適應性、暴露產品的缺陷，是新產品研發、鑒定、批量生產全過程的重要試驗手段，我們可以依據客戶不同的試驗需求，提供范圍廣闊的綜合環境試驗系統，如三綜合、四綜合試驗設備方案（風冷振動試驗系統配低氣壓試驗箱）、多軸振動試驗系統和最新試驗技術。

The Combined Environmental Test System isa combination of test chamber and vibration test system,whereby different temperature (high/low temperature),humidity,vibration (sinusoidal/random) and electrical stressare applied on the specimen according to the preset period to perform "Environmental Simulation"of temperature,humidityand vibration.As compared to single environmental factor test, this test can simulate the products in transport and operation environmentsmore realistically.It isan important test method for the whole processof newproduct researchanddevelopment,identificationand mass production.We can providea wide range of comprehensive environmental test system according to different test needs of customers.Such as three comprehensive, four comprehensive test equipment scheme (air-cooled vibration test system with low pressure test chamber),multi-axis vibration test system and the latest test technology.

CONNECTION MODE BETWEEN

SHAKERANDCHAMBER

振動臺與環境箱連接方式

A振動臺與試驗箱直接連接

Shaker connected with chamber directly

B振動臺與試驗箱通過過渡頭連接

Shakerconnected with chamber bya transition connection

C振動臺與試驗箱通過平臺連接

Shakerconnected withchamberbya table

D振動水平方向與試驗箱連接

Vibration horizontal direction connected with chamber

BASICKNOWLEDGEVIBRATION

振動基本知識

振動原理Vibrationprinciple

振動的基本原理都是幅度隨著時間變化的正弦函數，通?？梢杂眉铀俣?；位移；速度，這些物理量來表示振動的是水平。

Thebasicprincipleistheamplitudeofthevibrationofasinefunction withtime,allyitccelerion;iscemet;ed,. quantitiestorepresentthevibrationishorizontal.

正弦曲線參數示意Parametersofsinecurve

Period(周期)t=1/f(f:Frequency)
Single Amplitude(單峰值）(0-p)
DoubleAmplitude(峰峰值)(p-p)=SingleAmplitude(單峰值） ( 0 - p ) x 2
Root-mean-squareValue(均方根值) (rms)=SingleAmplitude (單峰值) ( 0 - p ) x 1 / sqrt { 2 }
AverageValue(平均值) (Ave)=SingleAmplitude(單峰值） ( 0 - p ) x 2 1 π
基本公式y(tǒng)(t)=Asinawt(w:AngularFrequency角頻率）

正弦掃頻試驗Sinesweeptest

以某種規律連續改變頻率激勵試驗品，目的是在評估的頻率范圍尋找引起諧振的特有頻率。

Somelawcontinuouslychanging frequency ofthe excitationtest product,aimedatthe
assessmentof thefrequencyrangetofindcause-specificresonance frequency.

主要參數Main parameter

■Frequency頻率[Hz].試驗時間TestTime[t]■Acceleration加速度 [ \mathsf { m } / \mathsf { s } 2 ] ■SweepRate掃頻速率(oct/min),[Hz/min]

電子電工產品在運輸過程所受的振動絕大多數是隨機性質的振動，隨機振動比正弦振動的頻域?qū)?，且是一個連續的頻譜，它能同時在所有的頻率上對產品進行振動激勵，真實克隆現實環境。

Thevibration experienced byelectricaland electronic productsduring transportation ismainly randomtype.Therandomvibrationhaswiderfrequencydomainthansinusoidalvibrationanditis acontinuousspectrum.Itcansimultaneouslyexcite the products using vibration ofalfrequency andclone the realenvironment.

主要參數Mainparameter

總均方根值OverallRMSValue(rms)[Grms] 功率譜密度值PowerSpectralDensity(PSD)[g2/Hz] 試驗時間TestTime[t]

沖擊與碰撞都屬于沖擊范疇，規定沖擊脈沖波形的沖擊試驗，主要用來確定元件、設備和其他產品在使用和運輸過程中經受多次重復（碰撞則是多次重復）機械沖擊的適用性及評估包裝保護。

Theimpactandcollision impactallbelong tothecategory,provisionsofshockpulseimpacttest is used to determine the main components, equipment and other products in the use and transportationprocesssubjectedtorepeated (colision isrepeated)andevaluate theapplicaility of packaging to protect the mechanicalshock.

主要參數Mainparameter

■脈沖類型MainShockPulse ■Post-load[%]P2 p2=B2/A\*100[%]■Pre-load[%]P1p1=B1/A\*100[%] ■速度Velocity[m/s]V■脈沖寬度ShockPulse Duration[s]t ■峰值加速度Acceleration[m/s2]A

RELATIONAMONGACCLERATION,VELOCITYANDDISPLACEMENT加速度、速度與位移之間的關系

關系Relation Accelerationa[m/s]=(2πf)d/1000=2πfv Velocityv[m/s]=2πfd/1000=a/2πf Displacementd[mm]=1000a/(2πrf)=1000v/2f 方程估計Equationfor Estimation A[m/s]0.0394df※1 6.28fv※1 V[m/s] 0.00628fd 0.159a/f※1 d[mm]25.5a/f※2 159.2v/f

Dividetheaccelerationvalueby9.8whenitsunit isG 2Multiplytheaccelerationvalueby9.8whenitsunitisG

UNIVERSALINTERNATIONALUNITS國際通用單位

THETERM術語

換算公式Conversionformula
力（F)Force:1kgf=9.80665N1kgf=2.2lbf長度Length:1inch25.4mm
重量（kg)Weight:1kg=2.2lbs速度Velocity:1m/s=39.37in
加速度Acceleration:1g=9.80665m/s2

1PowerSpectralDensity功率譜密度單位帶寬所具有的平均能量，它描述振動過程在不同頻段的能量分布；

■OverallrmsValue總均方根值加速度功率譜密度曲線在其規定的試驗頻率區間的曲線（功率譜）下面積的平方根，但不要將其跟正弦振動的峰值進行比較，他們之間沒有任何關系。

1Pre-Pulse（前脈沖），post-pulse（后脈沖）在主脈沖的前后分別增加前后補償脈沖的作用是使速度和位移最后回歸到零的位置

■Theaverage energyof PowerSpectral Density hastheunitsof bandwidth,which describestheprocessinthevibrationenergydistributionindifferentfrequency bands;

OverallrmsValuecurve initspredeterminedtestfrequencyrange (powerspectrum) underthesquarerootofthearea,butdoitwiththepeaksinusoidalvibrationwere compared, there isno relationship between them;

■Pre-Pulse,post-pulse,respectively,beforeandaftertheincreaseinthecompensationpulse beforeand after themain pulse isthe role of the velocityand displacement finally return to the zero position.

Guidance使用指導

位移d、加速度a頻率f關系 速度 v . 頻率f、加速度a關系

The relationship among displacement, acceleration and frequency.

The relationship
among velocity,
frequency and acceleration.

速度V、頻率f、位移d關系

The relationship among velocity,frequencyand displacement .

D:位移Displacement \mathsf { v } \colon 速度Velocity a:加速度 Acceleration f:頻率 Frequency

DIGITAL VIBRATIONCONTROLLER

數字振動控制器

VCS系列振動控制器具有全系列的振動試驗功能，能夠在電動或液壓振動臺上實現隨機、正弦掃頻、諧振搜索和駐留、典型沖擊、正弦加隨機、隨機加隨機、在寬帶隨機下實現窄帶隨機加正弦、沖擊響應譜控制、瞬態仿真、道路譜模擬等振動試驗。控制軟件運行在Windows下，界面友好，操作便捷；同時系統還提供完善的試驗進程管理、數據指示和試驗報告生成等功能，使得測試更加方便、可靠。

振動控制儀采用模塊化設計和分布式數據處理方案，非常容易進行通道及試驗功能擴充。32位高速雙DSP處理結構、低噪聲電路設計技術、24位A/D和D/A硬件，高速數據通訊電路組成，采用自適應控制算法的控制軟件功能強大，將振動控制系統技術性能提高到一個全新的水平。

隨機Random

VCS series vibration controller has the full range of vibration test function,which can achieve vibration tests,such as random,sinusoidal sweep,resonance search and dwell, classical shock,sinusoidal-random,random-random,narrowband random-sinusoidal, shock response spectrum control, transient simulation,and road spectrum simulation on electro-dynamic or hydraulic vibration table.Control software is performed in Windowswith friendly interfaceand convenient operation.At the same time,the system also provides perfect testing process management,data instructions and test report generation,making the test more convenient and reliable.

Vibration control system adopts modulardesign and distributed data processing program to carry out the expansion of the channel and test function easily. Composed of 32-bit high speed DSP processing structure,low noise circuit design technology,24 bit A/Dand D/A hardware, high-speed data communication circuit.The control software of the adap tive control algorithm is powerful,and promotes the technical performance of vibrational control system to a new level.

典型沖擊 Classic Shock

正弦Sine

內置ICP恒流源和電荷放大 自動或手動生成 Automatically or manually generate WORD test report.
器，電壓和電荷輸出型振動 WORD試驗報告，用 Users can self-customize
傳感器可直接接入系統ure 05 戶可定制報告內容 report content.
and charge amplifier.Vibration 小量級信號檢查系 Small signal in checking the
sensor of voltage and charge output performance of the system
can be directly connected to the 統控制環性能、測 control loop and test system
system. transfer function 試系統傳遞函數

SPECIFICATIONS

VIBRATIONTESTSYSTEMS

標準振動臺

Et系列標準振動臺具有重量輕、體積小，移動方便，可廣泛用于加速度傳感器校正、微小零件的耐振試驗、疲勞試驗和機械阻抗的測試，同時也可用于教學科研以及實驗室。

Withlightweight,smallvolume,onvenienttoove,ETseriesstandardbrationtableisidelyusedinteacceleatiosn sorcalibration;vibrationtestfatigue testandmechanicalimpedancetestofmicroparts;atthesametime,theETsriescanalso be used for teaching and scientific research and laboratory.

FEATHRES

特點

01于高精度的振動儀的校正，機械阻

用于振動工程學的基礎試驗02 等教育器材。

Apply to the calibration of high precision vibration meter, mechanical impedance test, and vibration analysis of the vibration source.

Apply to the vibration test of various small and lightweight parts such as sensor, electronic,electric machines and etc.

用于各種各樣的傳感器、電子、 03 電氣機器等小型輕量的被試驗品 的振動試驗。 Apply to educational equipment for the basic test of vibration engineering.

SPECIFICATIONS

SHOCKTEST SYSTEMS SERIES

沖擊試驗機系列

03

沖擊試驗機 ShockTest Systems

高加速度沖擊試驗機 HighAccelerationShockTestSystem

斜面沖擊試驗機 Incline Impact Test Systems

碰撞試驗機 BumpTestSystems

沖擊/跌落測量系統 Shock/DropMeasurement Systems

SHOCKTESTSYSTEMS

沖擊試驗機

產品在生產、運輸、裝卸、使用過程中，總會不可避免地受到?jīng)_擊、碰撞、自由跌落、翻倒等作用，這些均是瞬態激勵作用在物體上，使得物體在瞬間產生很大的速度、加速度、應變速率等力學特征量，完全不同于物體在靜態載荷下受到的作用，使得物體在結構強度和性能穩定性方面發生故障，乃至失效。因此很有必要對沖擊作用進行研究和沖擊環境的再現，來考核物體在沖擊環境下的結構強度和性能穩定。

Productsare inevitably affected by impact,bump,free fall, tumbling,etc.during production,transportation,loading and unloading as well as during the use of the products.All of these are transient excitation on the object,causing the object to produce mechanical characteristics of high speed, acceleration,strain rate,etc instantly.These kind of characteristicsare completely different from that in static load,and may cause problems to the object in terms of structural strength and stabilityand sometimes the object may fail.Therefore,it is necessary to study the effect of impact and reproduce the shock environment, to assess the structural strength and performance of the object under shock environment.

THEPRINCIPLESOFOPERATION沖擊試驗機工作原理

FIELD OFAPPLICATION運用領域

圖 鳥 母 D航空 船舶 軍工 消費電子 汽車 家電Aerospace Ship Military Consumer Automobile Home AppliancesElectronics

Utilize pneumatically/hydraulically combined booster and braking system to prevent multiple impact.

THEAPPLICATION OF SHOCKTEST沖擊試驗作用

沖擊試驗用于精確測量產品脆值以及評估產品包裝的保護能力，無論您是否希望進行完整的產品破損邊界評估、工業標準的沖擊脈沖或者公司自己訂立的條件，我們都可以提供最先進的沖擊試驗系統來滿足您的應用要求。

適用于航空、航天、船舶、軍工、消費電子、汽車、家電及顯示設備等領域的抗沖擊試驗。

通過選擇不同的波形發生器，可執行：半正弦波；后峰鋸齒波；梯形波。

Shock test is used to accurately measure the product fragility and evaluate the protective ability of product packaging.To do a boundaryassessmenton complete productbreakage,industrial standard shock pulse or company's internal standards,we can provide the mostadvanced shock test system to meet yourapplication requirements.

It is suitable for shock test in the fields of aviation,aerospace,shipbuilding,military industry,consumer electronics,automobiles,home appliances and display equipment.

Byselectingdifferentwaveform generators,itcan perform half sinusoidal wave,sawtooth wave,or trapezoidal wave.

SPECIFICATIONS技術參數

HIGHACCELERATIONSHOCKTESTSYSTEM高加速度沖擊試驗機

主要應用于：手機、計算機部件、光學部件、連接器等，還可以作為緩沖材料實驗機測試緩沖材料的性能。

Mainapplicatisobileoesomputerompoetsticalompoetsectors,tlsoedtoestto bance ability of materials.

SPECIFICATIONS

AUXILIARYDEVICE

輔助裝置 (組件)

DUALMASSSHOCKAMPLIFIER(DMSA)

WAVEFORMGENERATOR波形發生器

安全裝置

1、用于危險區域地面保護的裝置，通過檢測到足夠的壓力而產生一個開關信號，實現區域安全保護。

A device used for ground protection in hazardous areas,which generates a switch signal by detecting the pressure of the trip to achieve area safety protection.

安全踏墊保護SafetyProtectionMats

2、當人體誤入危險區域時，通過受光器和發光器自動檢測到，并暫停工作，從而保護人安全。

Whenthe humanbodystrays into the dangerousarea,the light receiver and luminizer will automatically detect and stop the equipment to protect humansafety.

光柵保護Grating Protection

INSTALLATIONREFERENCEDRAWING安裝參考圖

INCLINEDIMPACTTEST MACHINE

斜面沖擊試驗機

斜面沖擊試驗機主要用于模擬產品包裝在實際運輸過程中抗沖擊損壞的能力。如：搬運、裝卸，火車更換車廂時的沖擊以及在運輸過程中緊急制動造成的沖擊等。傾斜沖擊試驗機符合行業標準的包裝測試規范，如ASTM，ISTA，ISO，和MIL-STD。

Inclinedimpacttesterismainlyusedtosimulate theimpactanddamageresistanceofproductpackaging inarealenvironment, suchashandlingloadingandunloading,mpactduringshiftingfromonecabintonotherndimpactresultedfromemergency brakeduringtansportIindocktesteratisfsidustrialandardsforpackaginguchsIAIOd.

SPECIFICATIONS技術參數

BUMP/SHOCK TESTMACHINE

碰撞試驗機

本產品適用于元器件、設備和其他電子電工產品在運輸或使用期間可能遭受到重復沖擊。碰撞試驗也可以作為確定樣品在結構方面的滿意設計的一種方法，或作為質量控制的手段。碰撞試驗基本在于樣品在碰撞試驗機上經受具有規定的峰值加速度和持續時間的標準脈沖的重復沖擊。

Componentsandotherelectronicand electricalproducts mayexperience repeating impactduring transportationoruse.Bump testcanbeusedasamethodtoensure thesatisfactionofdesignstructureorasaqualityasurancemethod.Specimenwilexperience regular peak acceleration and continuous impact with standard pulse during the bump test.

FIELDOFAPPLICATION運用領域

鳥 ? □ D
航空 船舶 軍工 消費電子 汽車 家電
Aerospace Ship Military Consumer Automobile Home AppliancesElectronics

SPECIFICATIONS技術參數

SHOCK/DROP

MEASUREMENTSYSTEMS

沖擊/跌落測量系統

沖擊測量分析儀是一種專用的沖擊波形捕捉和分析平臺，適用于一般沖擊和高沖擊環境下的沖擊事件捕捉、測量和分析。它能夠滿足ISO、GJB150、GJB360、GB2423、MIL-STD-810等沖擊測試標準，是沖擊環境試驗和測量分析的專業工具。

Shock measurementanalyzeris speciallyusedasaplatformtocaptureandanalyzeshockwave.Itissuitableforcapturing,measurementandanalysisoftheeventsundernormalorhighimpacts.ItcanmeetISO,GJB150,GB360,GB2423,M-STD-80and othershock test standardsand isaprofessional toolfor environmentalshock testing,measurementand analysis.

SPECIFICATIONS

DROPTESTERFOR HEAVYPACKAGE

零高度跌落試驗機

對于大型包裝貨物，一般質量較大，在運輸、搬運時垂直跌落高度較低。要求跌落試驗高度也相對較低，零高度跌落試驗機主要用于較大型包裝件跌落測試。零高度跌落試驗機由一個可以快速向下移動的E型叉架作為托架，被測物件按試驗要求（面、棱、角試驗）放置平衡。試驗時，托架先于試件高速向下運動，加速度 { > } 3 6 . 保證托架與試件清楚分離，實現自由跌落。標準跌落高度范圍2.54cm—120cm。

For large packaging with high mass,the vertical drop height during transport will be low and therefore they need drop testwith relativelylowdrop height.Zero Height Drop Tester ismainly used fordrop test of big package.It uses an E-shaped fork as a bracket that can move downward quickly and the specimen is placed in balance according to test requirement (surface,edge orcornerdrop test).During testing,the bracketmovesdownwards quicklyahead of specimenwith acceleration greater than 3G to ensure the separation of bracketand specimenand achieve free fall.Thestandard fall distance is ranged between 2 . 5 4 0cm - 1 2 0cm

SPECIFICATIONS技術參數

DROPTESTMACHINE

包裝跌落試驗機

包裝跌落試驗用于測試包裝件在使用和運輸、裝卸過程中受到跌落沖擊的影響程度，LABTONE ^ { \prime \prime } 1 6 + ^ { \prime \prime } 設計嚴格保證了其精確性。除了精確的平面跌落試驗外，也可以進行棱跌落和角跌落試驗，以便對包裝/產品進行完整的性能評估。

Packagingdroptestisusedtodeterminetheeffectofimpactonthepackageduringuse,transportation,loadingandunloading The strictly designed LABTONE " 1 \mathsf { G } + \prime \prime ensures itsaccuracy.Apart from accurate plane falltest,it can also perform edge drop and corner drop test to make a complete evaluation on the performance of packaging and product.

WORKINGPROCESS工作流程

SPECIFICATIONS技術參數

DROPTESTERFOR PORTABLEGADGETS

便攜式產品跌落試驗機

DT系列專為智能手機移動電話以及其他小件物品提供跌落沖擊測試，使產品按要求的姿態(不翻轉)跌落有效地提供了跌落測試的再現性。

DTseriesprovidesdropimpacttestforsmartphones,cellphonesandothermobile gadgets.Thespecimenholdingsystemcan manipulate the dropping posture,and provide effective reproducibility of drop tests.

FEATHRES

特點

01 筆式氣缸夾持產品一起按要求姿態跌落，到 末端氣缸打開，防止重心偏移及空氣對產品的 跌姿態的干擾； Keep the dropping posture by clamping of products with pneumatic pen cylinder to avoid the disturbance of posture by the gravity shift or atmospheric friction.The cylinder will be released near the end of dropping stroke.

02 跌落高度可自由調節設定； The drop height can be settled flexibly.

03 安全設計-吸合式電磁鐵不會意外釋放試件除非被激活。

Safetydesign-theelectromagnetic holder never releases the specimen holding system unless it' senergized.

SPECIFICATIONS

RELEASE HOOKS

KDT2000釋放抓鉤

概述：跌落試驗裝置主要模擬包裝件在運輸搬運過程中的跌落或沖擊。它特別適合在不規則條件下，做大型樣品的沖擊載荷測試。不管包裝的尺寸或形狀，本系統都能夠執行各種自由跌落(平面，角或邊)。使用時，通過測試包裝件上綁帶勾_上提升環;將提升環裝進釋放機構鉗口，然后通過提升設備將釋放機構和測試包裝件提升至試驗跌落高度。腳式釋放開關通過激活釋放機構中的電磁閥，使釋放機構鉗口打開，使包裝自由跌落。放機構中的電磁閥，使釋放機構鉗口打開，使包裝自由跌落.

The KDT2oo0 Drop Tester is designed to simulate the drops and mechanical hazards that occur in distribution.It is especially suited tovery large,heavy payloads which cannot be tested on conventional drop test machines. Regardless of the size or shape of the package, the system is capable of performing a variety of free fall (flat, corner oredge).When used, lift the ring by lifting it onto the release mechanism jaw and then lifting the release mechanism and the test package up to the test drop height by lifting the device.The foot release switch activates the solenoid valve in the release mechanism so that the release mechanism jaws open and the package is free to fall.

SPECIFICATIONS