該頁(yè)無(wú)縮略圖
Santak Castle Series UPS
CASTLE 3C3 HD 20-200kVA
CASTLE 3C3 HD 20-200K
3C3 HD UPS is the new generation threephase towerUPS,which adopts the mostadvanced power electronicsand digital signal control and protection technology. It performs higher efficiency, higher performance,and more convenient operation,and can provide users with high quality powersupplyguaranteeinvarious industries.
Typical application environment
Small and medium-sized data centers Computerdataroom
Automation control system
Transportation
·Banking,Finance
·Communication industry,5G
·Production and manufacturing
Powerrange:20/30/40/60/80/100/120/160/200kVA
Topology:Advanced three-level inverter, high-frequency IGBT conversion/ inversion technology
Inputand output:22oV/38oVthree-phase four-wire
Frequency: 50/60 Hz
Product features
·Adopt the new generation of IGBTand optimized three-level inverter topology,with online efficiency up to 96%and ESS mode efficiency up to 9 9 %
·Output power factor1.0.
·Internal modular design,MTTR<3O minutes.
·High power density,save more than 50 % footprint.
·Intelligent batterymanagement function to extend battery life cycle. ·5" color touch screen for easy operation.
·Support lead-acid batteriesand lithium batteries.
·Parallel UPS unitsup to4,support common battery @2 UPS parallel. ·Support battery cold start.
Smaller size, saving space in computer room
The 3C3 HD adopts innovative modular design,optimizes the design and layout of rectifiers,inverters and other components.On the premise of ensuring reliability,the volume and weight of the product are greatly reduced,which greatly saves the computer room space and improves the utilization rate of the computer room.Compared to currentmainstream productsin the market,the 3C3 HD saves 50 % in footprint space and 90 % in volume.
| Model | width | Pemth | Height | Fmotprint | Volumn | |
| 40kVA | 3C3HD | 330 | 668 | 521 | 0.21 | 0.05 |
| Product A | 440 | 750 | 1600 | 0.33 | 0.53 | |
| Product B | 320 | 840 | 867 | 0.27 | 0.23 | |
| 80kVA | 3C3 HD | 330 | 690 | 975 | 0.23 | 0.22 |
| Product A | 600 | 850 | 1600 | 0.51 | 0.82 | |
| Product B | 450 | 840 | 1400 | 0.38 | 0.53 |
Extra Low TCO (Total Cost of Ownership)
3C3 HD 20-20OK UPS efficiency is up to 9 6 % at online double conversion mode and 9 9 % at ESS mode.
ESS mode can provide up to 9 9 % system efficiency,significantly reducing UPS power consumption and cooling power consumption.
·In ESS mode,UPS built-infilterprotection devicescanstillprovide surge protection toensure high-quality power output.
·3C3 HDcan inteligently switch between ESS mode and double conversion mode automatically according to the quality of the power grid.The typical switching time is only2-4ms.
·In ESS mode,thereliabilityof key components isfurther improvedand the service life is longer.
Safe and reliable. Suitable for various application environments
DUSTPROOFDESIGN
Santak3C3HDhasadustfiltertoisolatedustfromtheoutsideof UPS,improving theadaptabilitytothe harsh environments.Atthesame time,theinternallayoutandairflowdistributionareoptimized,whichgreatlyreduces the dust accumulation.
·Dust filter complying with American fire protection standard UL94and dust filter standard UL900.
·Easy to disassembleand clean.Lowmaintenance cost.
CAPACITORSHEALTHMONITORING
Santak 3C3 HD innovativelyadoptsa filter capacitor health monitoring function,through real-time temperaturedetectionof the internal capacitor,monitors the health statusof the capacitor,provides early warning informationbefore thecapacitor isdamaged,avoidsthe occurrence of failure,and greatly guarantees the stabilityand reliability of power forcritical loads.
Use temperature sensors to detect real-time temperature ofall input and output filtering capacitors. Fullyautomatic intelligent judgmentof capacitor life,providing warning information before the expiration of capacitor life to avoid faults. The protection measures will be activated as soon as possible in case of abnormal capacitor faults,avoiding furtherexpansion of faults.
PCBACOATING
Short circuit caused by corrosion of PCBA is one of the important reasons for failure of UPS,especiallyin coastal cities.Santak 3C3HDuses advanced intelligent PCBA coating technology to further improve the salt spray and corrosion resistance of the product.
Full-automatic coating process to avoid manual operation errorand ensure coating precision and consistency. Blue-raydetection technologyis used to ensure the coating quality.
INTELLIGENTPARALLEL REDUNDANCY
TheSantak3C3 HD hasbuilt-in synchronous CAN communication, andno need to install a parallel card during parallel operation. It ensuresoutput synchronousand loadbalance of each UPSin the parallel system,and ensures the reliabilityand redundancy of the parallel system.
Point-to-point control, no "master-slave" dependency parallel control.
No traditional loadsharing lines.
Eliminatesinglepointoffailure in the system.
Fast fault detectionand breakaway technology.
Reliabilityis furtherenhanced.
SANTAKINTELLIGENTBATTERYMANAGEMENT
3C3 HDadopts Santak intelligent battery management technology.Inaddition to the traditionaltwo-stage charging,italso hasan intelligentrestmodetoavoid theaging effectofthe batteryduetolong-termfloating charge.This technologycanalsoaccuratelypredicttheworkingstateofthebattery,detectpotentialdischarge faults in advance and give a warning.
·The first two-stage charging modeensuresthat thebatteryis fully charged. ·The third stage restmode make thebattery inthestate ofnatural discharge.UPSdetectsthe batteryvoltageinreal time,and automaticallystartsthecharger to entera new charging cycle againwhen the batteryvoltage drops to the setting value. Intelligent restmode can extend battery lifebyup to 5 0 %
Convenient operation and maintenance
Santak 3C3HDadoptsa 5"colorful touch screen with 3color LEDindicators,which isconvenient forusers to checkUPSrunningstatusandoperatetheUPS.
MENUITEMS
Meters:Display the measurements of the system or critical load.
Control:Accessvarioussystemcontrol screens.
Statistics:Accessand viewthe specificoperating valuesofthe system.Such operationsshallbe performed by Eaton service engineers only.
Log:Access the system logs,including alerts,noticesand commands.
Info:Display the UPS and HMl information.
Settings:Access various screen control variables for system operation.
| Model | 3C3HD-20K | 3C3HD-30K | 3C3HD-40K | 3C3HD-60K | 3C3HD-80K | |
| Power rating | 20KVA/20KW | 30KVA/30KW | 40KVA/40KW | 60KVA/60KW | 80KVA/80KW | |
| Wiring | Wiring Three phase+Neutral+Ground | |||||
| Mains voltage range | 201~ 478Vac (L-L); 116~ 276Vac (L-N) | |||||
| Bypassvoltagerange | 338~458Vac (L-L); 195~264Vac (L-N) | |||||
| Frequency | 50/60Hz | |||||
| Frequency range | 42 - 70Hz | |||||
| Power factor | ||||||
| THDi | ≥ 0.99 | |||||
| Voltage | 230/400Vac default (220/380V,240/415V optional) | |||||
| Votlageregulation | ||||||
| Power factor | ||||||
| Overload | 111 ~125%,10mins | |||||
| 126~150%,1min | ||||||
| parallel | Up to 4 units | |||||
| Onlinemode | Up to 96% | |||||
| Efficiency | ECO mode | Upto 99% | ||||
| Battery Voltage | 320V~607V (432V default) | |||||
| Battery | Maxcharge current | 25A 38A | ||||
| Ambient temperature | ||||||
| Environment | Storage temperature | 0-40°C -15~+55°C | ||||
| Ambient humidity | 5-95% | |||||
| Altitude No derating | ||||||
| Diamension (W*D*H) | 330*668*521mm | |||||
| Physical | Net Weight | 45kg | ||||
| 41kg 55kg | ||||||
| Gross weight Safty | 50kg IEC 62040 | |||||
| Model | 3C3HD-100K | 3C3HD-120K | 3C3HD-160K | 3C3HD-200K | ||
| Power rating | 100kVA/100kW | 120kVA/120kW | 160kVA/160kW | 200kVA/200kW | ||
| wiring | Wiring Three phase+Neutral+Ground | |||||
| Mains voltage range | 201~ 478Vac (L-L);116~276Vac (L-N) | |||||
| Bypassvoltage range | 338~458Vac (L-L); 195~264Vac (L-N) | |||||
| Frequency | 50/60Hz | |||||
| Frequency range | 42 - 70Hz | |||||
| Power factor | ≥ 0.99 | |||||
| THDi | ||||||
| voltage | 230/400Vac default (220/380V,240/415V optional) | |||||
| Votlage regulation | ||||||
| Power factor | ||||||
| Overload | 111~ 125%,10mins | |||||
| 126~150%,1min | ||||||
| parallel | Up to 4 units | |||||
| Efficiency | Online mode | Up to 96% | ||||
| ECO mode | Up to 99% | |||||
| Battery Voltage | 320V~607V (432V default) | |||||
| Battery | Maxchargecurrent | 100A | ||||
| Ambient temperature | 0-40°C | |||||
| Environment | Storage temperature | -15~+55°C | ||||
| Ambient humidity | 5-95% | |||||
| Altitude | No derating | |||||
| Diamension (W*D*H) | 500*850*1230 | |||||
| Physical | NetWeight | |||||
| Gross weight | 149kg | |||||
| Safty | 162kg IEC 62040 | |||||
SANTAK ELECTRONIC (SHENZHEN) CO.,LTD.
Shenzhen,P.R.China Tel: 008675527572666 Website:www.santak.com Address:No.8BaoshiRoad,Baoan FaX:008675527572730 (27572480) District,enhen, Email:santakexport@santak.com September.2024
